|
|
08-08-2018, 05:04 AM
|
#241
|
Rivet Master
Churubusco
, Indiana
Join Date: Nov 2017
Posts: 2,007
|
Slow n steady
|
|
|
08-08-2018, 03:59 PM
|
#242
|
Rivet Master
2005 34' Classic S/O
2006 39' Land Yacht 396 XL
north blenheim
, New York
Join Date: Sep 2012
Posts: 2,847
|
Take your time with the plywood spacing under the shower base. Use a hole saw to make the hole for the drain and stand in it before you finalize the install. Also a good time to seal up any holes to the underneath while you’re there.
|
|
|
08-09-2018, 05:15 AM
|
#243
|
Rivet Master
Churubusco
, Indiana
Join Date: Nov 2017
Posts: 2,007
|
Thanks Bob, will do
I think part of the reason this one cracked was because it wasn't lined up from the factory
Got the floor prepped yesterday:
Pull all the staples and carpet remnants
Use the spackle stuff
Sand the spackle stuff
Paint with latex sealer
Today i should be able to lay down the vinyl tiles, or get started at least
|
|
|
08-09-2018, 12:53 PM
|
#244
|
Rivet Master
2005 34' Classic S/O
2006 39' Land Yacht 396 XL
north blenheim
, New York
Join Date: Sep 2012
Posts: 2,847
|
Yes....apparently the factory has had a problem with lining things up for quite a while...it’s even apparent on the new cabinets that they manufacture. But then again, what do I know....I only sell screwdrivers. Regards, Bob
|
|
|
08-09-2018, 03:51 PM
|
#245
|
4 Rivet Member
1986 34.5' Airstream 345
Alliance
, Ohio
Join Date: Apr 2007
Posts: 262
|
I thought you sold wrenches too!
|
|
|
08-09-2018, 07:55 PM
|
#246
|
Rivet Master
Churubusco
, Indiana
Join Date: Nov 2017
Posts: 2,007
|
Going down pretty well (used a chalk line, see our previous conversation about things being lined up, was a good idea, the couch is crooked )
I definitely think I got the early 80s look I was going for!
|
|
|
08-11-2018, 09:52 AM
|
#247
|
Rivet Master
Churubusco
, Indiana
Join Date: Nov 2017
Posts: 2,007
|
Got the floor down!
Still need to trim it
|
|
|
08-11-2018, 10:51 AM
|
#248
|
Rivet Master
2005 34' Classic S/O
2006 39' Land Yacht 396 XL
north blenheim
, New York
Join Date: Sep 2012
Posts: 2,847
|
Great idea on the shoe holder on the door.....mind if I copy that ???? Is your couch crooked to the floor ???
|
|
|
08-11-2018, 12:46 PM
|
#249
|
4 Rivet Member
1985 32.5' Airstream 325
Lindsay
, Ontario
Join Date: Aug 2010
Posts: 479
|
Bob sells wrenches but talk
about a Sodomi charge wow😲😲😝
|
|
|
08-12-2018, 06:47 AM
|
#250
|
Rivet Master
Churubusco
, Indiana
Join Date: Nov 2017
Posts: 2,007
|
Quote:
Originally Posted by bobmiller1
Great idea on the shoe holder on the door.....mind if I copy that ???? Is your couch crooked to the floor ???
|
Go for it, we copied it from someone else, LOL
Baseboard on the couch was not parallel to the centerline of the airstream
|
|
|
08-12-2018, 07:33 AM
|
#251
|
Rivet Master
2005 34' Classic S/O
2006 39' Land Yacht 396 XL
north blenheim
, New York
Join Date: Sep 2012
Posts: 2,847
|
LOL, Regards, Bob
|
|
|
08-12-2018, 07:44 AM
|
#252
|
Rivet Master
Churubusco
, Indiana
Join Date: Nov 2017
Posts: 2,007
|
Spent the rest of yesterday cleaning up and installing the post holders for the little tables, and fighting plumbing
Replaced the runs to the shower
Got a detla cartridge holder/cartridge combo... Got home and oops, it was just a cartridge holder, went to home Depot with the part number, employee tries telling me I need to call delta and there's no way he can help me because there's sooooooo many cartridge options... 30seconds on google with the part number tells me it fits 13/14/1300/1400/1700 series cartridges
Grab one of those... It's supposed to control temp and flor rate... It only controls temp, flow is always on!
The first univetsal trim kit I got was actually moen, so I went back for a delta one... It doesn't fit either...
Plumbing...
__________________
1983 Airstream 310 Class A Motorhome
-Rob
|
|
|
08-13-2018, 05:12 AM
|
#253
|
Rivet Master
Churubusco
, Indiana
Join Date: Nov 2017
Posts: 2,007
|
Fixed another factory flaw...
The top shelf in the pantry, it was sagging
Turns out, of the 4 holes supposed to have rivets in them, there was only ONE rivet in the corner... Good job airstream
|
|
|
08-13-2018, 06:51 AM
|
#254
|
Rivet Master
1974 20' Argosy 20
Richmond
, Kentucky
Join Date: Jan 2003
Posts: 9,116
|
Quote:
Originally Posted by Magnet18
Fixed another factory flaw...
The top shelf in the pantry, it was sagging
Turns out, of the 4 holes supposed to have rivets in them, there was only ONE rivet in the corner... Good job airstream
|
My first thought was road vibration caused the rivets to fall out but after looking closer it doesn't appear there was ever anything in those holes. I guess I shouldn't be to surprised
__________________
Air forums # 1674
1974 20' Argosy Motor Home
1975 24' Argosy Motor Home
1974 31' Excella trailer (parting out, as of 4/1/2015 I have wheels & windows left to sell)
|
|
|
08-13-2018, 08:33 AM
|
#255
|
Rivet Master
Churubusco
, Indiana
Join Date: Nov 2017
Posts: 2,007
|
Quote:
Originally Posted by bkahler
My first thought was road vibration caused the rivets to fall out but after looking closer it doesn't appear there was ever anything in those holes. I guess I shouldn't be to surprised
|
That was my thought as well, but there were no holes
The one in the corner you see is my replacement, that one had fallen out, causing the back corner to sag
|
|
|
08-13-2018, 12:46 PM
|
#256
|
Rivet Master
Churubusco
, Indiana
Join Date: Nov 2017
Posts: 2,007
|
Found the way back in the recesses under the cabinets... Anybody recognize it?
|
|
|
08-13-2018, 01:30 PM
|
#257
|
Rivet Master
2005 34' Classic S/O
2006 39' Land Yacht 396 XL
north blenheim
, New York
Join Date: Sep 2012
Posts: 2,847
|
Stove control knob cover ??
|
|
|
08-13-2018, 02:00 PM
|
#258
|
Rivet Master
Churubusco
, Indiana
Join Date: Nov 2017
Posts: 2,007
|
Quote:
Originally Posted by bobmiller1
Stove control knob cover ??
|
Could be, I tried seeing if it fit on either the microwave or stove and it didn't seem to...
definitely an original knob or cover of some sort.
__________________
1983 Airstream 310 Class A Motorhome
-Rob
|
|
|
08-13-2018, 03:30 PM
|
#259
|
Rivet Master
1982 31' Airstream 310
champaign
, Illinois
Join Date: Oct 2012
Posts: 4,072
|
I think it's the top cover of the filtered water faucet. Is your filtered water faucet still in place?
|
|
|
08-13-2018, 03:41 PM
|
#260
|
Rivet Master
Churubusco
, Indiana
Join Date: Nov 2017
Posts: 2,007
|
Quote:
Originally Posted by mayco
I think it's the top cover of the filtered water faucet. Is your filtered water faucet still in place?
|
It's been replaced, so that would make sense.
Does anyone want it? If not, it's trash to me I guess
__________________
1983 Airstream 310 Class A Motorhome
-Rob
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|