|
01-13-2019, 05:22 PM
|
#1
|
Rivet Master
2018 30' Classic
Thousand Oaks
, California
Join Date: Mar 2017
Posts: 1,637
|
Anyone seen this before?
Looks like water or something got under our molding? Hope it’s still under warranty, thoughts on maybe a quick fix or just let airstream tackle it?
__________________
BigSxyWhtGuy
Follow our adventures!
@airstreamvagabond on Instagram and YouTube
|
|
|
01-13-2019, 05:35 PM
|
#2
|
Rivet Master
2000 25' Safari
Davidson County
, NC Highlands County, FL
Join Date: Aug 2006
Posts: 4,493
|
If your trailer is still under warranty, document it immediately with Airstream.
If the warranty is done, and you want to replace that flexible molding it comes in rolls, peal and stick.
ODM has it in vinyl/chrome, 1/2" wide ~$2 per ft and 1" wide ~$3 per ft
__________________
Alan
2014 Silverado LTZ 1500 Crew Cab 5.3L maximum trailering package
|
|
|
01-13-2019, 05:39 PM
|
#3
|
Overkill Specialist
Commercial Member
2020 30’ Globetrotter
2014 23' International
Dadeville
, Alabama
Join Date: Oct 2015
Posts: 4,516
|
No water just the belt line chrome trim peeling. Very common problem. Very easy fix. While you are at it you can seal the hard and upgrade the mild steel hardware behind the lower trim to stainless steel.
Here’s my blog post
http://www.airforums.com/forums/blog...ehind-it-2971/
|
|
|
01-13-2019, 06:02 PM
|
#4
|
"Cloudsplitter"
2003 25' Classic
Houstatlantavegas
, Malebolgia
Join Date: Jun 2007
Posts: 20,000
|
Get it replaced under warrantee...but be prepared to replace/repair it again before too long.
I just installed 3m reflective tape on ours. 1" & 1.5" wide. Reflective, 9005 blue.
Worked... well and looked pretty good.
^
Scroll up-down for more info.
Good Luck
Bob
🇺🇸
__________________
I’m done with ‘adulting’…Let’s go find Bigfoot.
|
|
|
01-13-2019, 06:06 PM
|
#5
|
Reads a lot
2017 30' Classic
Titusville
, Florida
Join Date: Dec 2016
Posts: 1,209
|
There was a thread on this for another 2017 or 2018 Classic that had the same problem. If I remember correctly, the molding was put on upside down so water could get in but not drain. I believe the original poster was able to take the handle off, got a new gasket and fixed the problem. I think mine may be upside down as well but I’m not absolutely positive (no water yet) but I’m watching. Right now it’s stored and not getting rained on.
__________________
Lauri
She Believed She Could so She Did.
|
|
|
01-13-2019, 06:18 PM
|
#6
|
Rivet Master
2018 30' Classic
Thousand Oaks
, California
Join Date: Mar 2017
Posts: 1,637
|
Thanks guys. Bob, tape looks great!
I’ll wait for airstream to fix it under warranty. Added it to my list, excited to see the main airstream base in April
__________________
BigSxyWhtGuy
Follow our adventures!
@airstreamvagabond on Instagram and YouTube
|
|
|
01-13-2019, 06:28 PM
|
#7
|
"Cloudsplitter"
2003 25' Classic
Houstatlantavegas
, Malebolgia
Join Date: Jun 2007
Posts: 20,000
|
I do think the tape looks good. It is a much easier install with 4 hands, wouldn't have turned out so well without the DW's help.
I only found the tape after replacing the "plastic chrome" twice. 🥴
T O..we have Family in Simi
Bob
🇺🇸
__________________
I’m done with ‘adulting’…Let’s go find Bigfoot.
|
|
|
01-13-2019, 06:48 PM
|
#8
|
Rivet Master
2018 30' Classic
Thousand Oaks
, California
Join Date: Mar 2017
Posts: 1,637
|
Quote:
Originally Posted by ROBERT CROSS
T O..we have Family in Simi
Bob
[emoji631]
|
I like Simi. Glad we left Cali! Shooting in Thousand Oaks followed by that big fire. It actually went through our old neighborhood. Happy to be on the road full time in the airstream!
__________________
BigSxyWhtGuy
Follow our adventures!
@airstreamvagabond on Instagram and YouTube
|
|
|
01-14-2019, 09:26 AM
|
#9
|
3 Rivet Member
2015 27' Flying Cloud
Caledonia
, Michigan
Join Date: Jan 2007
Posts: 169
|
I also had to have my lower belt molding replaced due to the same issue when the chrome layer pealed off. The new molding will not stick well if the old adhesive is not completely removed, which was not done well by my dealer. Cold and wet also make adhesion difficult.
I ended up adding some 3M VHB tape under the replacement molding to make it stick better.
|
|
|
01-14-2019, 01:35 PM
|
#10
|
2 Rivet Member
2018 30' Classic
Eden Prairie
, Minnesota
Join Date: Jul 2018
Posts: 68
|
You have a two year warrenty should be covered
|
|
|
01-14-2019, 03:01 PM
|
#11
|
2 Rivet Member
2017 23' Flying Cloud
Port Richey
, Florida
Join Date: Feb 2017
Posts: 41
|
Thanks for the idea...I almost want to replace mine and there’s nothing wrong with it.
|
|
|
04-15-2019, 12:57 PM
|
#12
|
NOAZRK
2004 34' Classic S/O
Currently Looking...
Kutztown
, Pennsylvania
Join Date: Jun 2008
Posts: 194
|
My 13 year old Belt Line and Belly Band Chrome needs to be replaced so it all matches. The original chrome looks okay however the AS Factory removed about 30 feet of it when a line of rivets came loose. Now the replacement chrome is pealing off. I need to find a better/proven replacement option. A brand that might be available on eBay or Amazon would be great. Sizes are 1 inch and 1/2 inch.
|
|
|
04-16-2019, 08:05 AM
|
#13
|
Rivet Master
2018 30' Classic
Thousand Oaks
, California
Join Date: Mar 2017
Posts: 1,637
|
Yes, they replaced all chrome belt around the entire trailer (not just impacted sites). Very impressed with airstreams approach to warranty work.
__________________
BigSxyWhtGuy
Follow our adventures!
@airstreamvagabond on Instagram and YouTube
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|