|
|
01-10-2019, 07:24 AM
|
#1661
|
Rivet Master
2014 31' Classic
2015 23' International
2013 25' FB International
Apache Junction
, Arizona
Join Date: Sep 2012
Posts: 6,223
|
I use the speed wrench that came with the Airstream for the stabilizers. Then I switch to the ratchet wrench that came with the ProPride. That way I can get to the measurement I need for towing slowly.
__________________
WBCCI Life Member 5123, AIR 70341, 4CU, WD9EMC
TV - 2012 Dodge 2500 4x4 Cummins HO, automatic, Centramatics, Kelderman level ride airbag suspension, bed shell
2014 31' Classic w/ twin beds, 50 amp service, 1000 watt solar system, Centramatics, Tuson TPMS, 12" disc brakes, 16" tires & wheels
|
|
|
01-11-2019, 11:02 AM
|
#1662
|
Rivet Master
2013 25' Flying Cloud
Wheaton
, Illinois
Join Date: Aug 2014
Posts: 649
|
For those using a powered drill, how do you crank it up to the same position consistently?
Like Switz, we use the speed wrench. When unhitching, we drop the WD jacks 30 turns (15 on one side, 30 on the other, then 15 on the first side). We then reverse the procedure when hitching up. Always on the money when I do final measurement.
For measuring height, I printed a ruler which I then taped to the breaker bar handle. I originally taped the ruler to the inside of each WD jack but they were scraped off in short order.
Greg
|
|
|
01-11-2019, 11:47 AM
|
#1663
|
Rivet Master
2012 27' Flying Cloud
W
, New England
Join Date: Oct 2012
Posts: 7,402
|
Quote:
Originally Posted by greghoro
For those using a powered drill, how do you crank it up to the same position consistently?
Like Switz, we use the speed wrench. When unhitching, we drop the WD jacks 30 turns (15 on one side, 30 on the other, then 15 on the first side). We then reverse the procedure when hitching up. Always on the money when I do final measurement.
For measuring height, I printed a ruler which I then taped to the breaker bar handle. I originally taped the ruler to the inside of each WD jack but they were scraped off in short order.
Greg
|
Similar to your ruler, I have a dedicated 1/2” socket wrench for the over center latches where I’ve placed a piece of tape at 6”. Since I always have that wrench with me when I’m hitching up, it’s always there as a last check. When I hit the road, if I’ve loaded up differently than I usually do, I occasionally find I need to adjust more or less depending on feel/porpoising. But 95% of the time, it’s spot on.
At the beginning of the season, I’ll check my weights again at the CAT scales just to be sure I haven’t changed the basics that much. If I do and that requires more or less WD, I’ll put a new piece of tape on the wrench.
I suppose it’s possible to scratch a line on the inside of the jack (though I personally wouldn’t do it), or, to paint some indicators at 4, 5, 6, 7 inches. But the tape on the wrench works fine for me.
|
|
|
01-11-2019, 10:53 PM
|
#1664
|
Rivet Master
South East
, Michigan
Join Date: Apr 2016
Posts: 552
|
Quote:
Originally Posted by greghoro
For those using a powered drill, how do you crank it up to the same position consistently?
Greg
|
I used a yellow paint pen and drew a line on jack at my desired hieght. Initially I used some electrical tape until I got everything just right. Paint line is hidden while camping - obvious when needed. I use a Dewalt 20 volt drill driver. I usually overshoot by a little and back down to my line.
__________________
Al
2017 29' SOB, 2022 Platinum F-150 SCrew, ProPride
|
|
|
01-11-2019, 11:00 PM
|
#1665
|
Rivet Master
2007 22' International CCD
Corona
, California
Join Date: Jul 2013
Posts: 9,180
|
The unofficial pp users guide...
I have a tape measure in the box I keep trailer towing and setup stuff in. I used it to set up the jacks accurately.
The new power WD jacks have a cross shaft that synchronizes the two jack motors automagically.
__________________
Rich, KE4GNK/AE, Overkill Engineering Dept.
'The Silver HamShack' ('07 International 22FB CCD 75th Anniversary)
Multiple Yaesu Ham Radios inside and many antennae sprouting from roof, ProPride hitch, Prodigy P2 controller.
2012 shortbed CrewMax 4x4 Toyota Tacoma TV with more antennae on it.
|
|
|
02-17-2019, 07:32 PM
|
#1666
|
2 Rivet Member
Northern
, Wisconsin
Join Date: Mar 2015
Posts: 33
|
2017 Yukon XL pulling a 2019 International Serenity 30’er.
I had Shawn ship me an extended length shank as I was sitting 2” high when cranked up. Installed the new shank and it’s perfectly level, I played with adjustments from 6” to 7.5”. At any less than 7.5” I had a bit of sway, but at 7.5” it feels AWESOME.
What’s the most I can raise the jacks? I was thinking about trying 8” just to see how it feels but I’m not sure what the upper limits are.
I know I need to hit the scales, but I’m mid-cross country trip and it’s not going to happen on this trip unfortunately.
(Also sorry is this has been covered, it’s hard to search the 1665 posts in this thread!)
|
|
|
02-17-2019, 07:41 PM
|
#1667
|
ObviouslyKnot
Currently Looking...
KAILUA
, HI
Join Date: Nov 2016
Posts: 862
|
I go up 4 fingers when not fully loaded, about 6" when loaded. Just don't use an impact driver.
__________________
James Mileur, HY80-2-Al,
2017 Classic Twin, 2016 RAM 3500 Megacab, ProPride hitch
|
|
|
02-21-2019, 06:55 PM
|
#1668
|
Vintage Kin
Fort Worth
, Texas
Join Date: Nov 2006
Posts: 8,014
|
Quote:
Originally Posted by dustent
2017 Yukon XL pulling a 2019 International Serenity 30’er.
I had Shawn ship me an extended length shank as I was sitting 2” high when cranked up. Installed the new shank and it’s perfectly level, I played with adjustments from 6” to 7.5”. At any less than 7.5” I had a bit of sway, but at 7.5” it feels AWESOME.
What’s the most I can raise the jacks? I was thinking about trying 8” just to see how it feels but I’m not sure what the upper limits are.
I know I need to hit the scales, but I’m mid-cross country trip and it’s not going to happen on this trip unfortunately.
(Also sorry is this has been covered, it’s hard to search the 1665 posts in this thread!)
|
Do you ever buy fuel? I’m on the CAT SCALE several times weekly. To do The Three Pass Method “might” take you thirty minutes.
Get the phone app for CAT. And the locator. Schedule a fuel stop. Max the fuel and hit the scales. Late morning thru early afternoon is easiest at truck stops well away from metro areas. (And, no, you’re not in anyone’s way).
While hitch adjustments might need some experimentation, tire pressure won’t. Per axle weights are a good start. Inflate to spec, not over.
|
|
|
02-26-2019, 04:48 PM
|
#1669
|
USNA79
2018 28' International
Clayton
, North Carolina
Join Date: Sep 2014
Posts: 22
|
Towing AS with tailgate down
Anybody ever tried towing an AS with the tailgate of a pickup down? MC doesn’t fit 8 foot bed. Thanks.
|
|
|
02-27-2019, 09:10 AM
|
#1670
|
2020 Classic 33
Box Elder
, South Dakota
Join Date: Oct 2013
Posts: 1,731
|
How much clearance do you have between the tailgate and the power jack now? How much room if you are in a tight turning/backing situation between the jack and also the propane tank cover?
You would pick up some additional distance with the PP hitch but it may not be enough especially when turning/backing.
__________________
Gary
2020 Classic 33 Twin, 2019 Ram 3500 Longhorn, ProPride
NØVPN
|
|
|
02-27-2019, 09:18 AM
|
#1671
|
ObviouslyKnot
Currently Looking...
KAILUA
, HI
Join Date: Nov 2016
Posts: 862
|
Parking lot, max turn, stop, drop tailgate. Can't take off tailgate?
__________________
James Mileur, HY80-2-Al,
2017 Classic Twin, 2016 RAM 3500 Megacab, ProPride hitch
|
|
|
03-07-2019, 10:22 AM
|
#1672
|
2 Rivet Member
Northern
, Wisconsin
Join Date: Mar 2015
Posts: 33
|
Can someone point me to the DIY pics/design for the hitch ball shank that others have created to help dealerships move their trailers with Proprides installed? Most of the dealers use a fork lift with a ball attachement. I have an extra shank (10" drop, replaced with 12" drop) that I'd like to turn into a Propride mover to help out my dealership. Search was unhelpful.
Thanks!
|
|
|
03-07-2019, 11:59 AM
|
#1674
|
Rivet Master
2002 30' Classic S/O
Fleming Island
, Florida
Join Date: Nov 2013
Posts: 4,673
|
I currently have a 2" stinger with which I have to use an adapter to fit my 2-1/2" receiver. My storage yard uses a fork lift with a 2" receiver welded to the fork. They just adjust the lift until it lines up with my stinger and hook up. On other trailers they put a ball mount in the receiver.
I want to change to a 2-1/2" stinger to eliminate play in the system. When I do that they will no longer be able to pick me up so I have a plan but haven't implemented it yet. I will buy a coupler and make a locking tool. When leaving the trailer I will install the locking tool and bolt the coupler onto the front of the stinger. If the bolt holes don't adequately line up I will buy a receiver tube and weld the coupler to it. I will then slip the receiver tube over the front of the stinger and pin it in place.
Al
__________________
“You cannot reason someone out of a position they have not been reasoned into"
Al, K5TAN and Missy, N4RGO WBCCI 1322
2002 Classic 30 Slideout -S/OS #004
2013 Dodge 2500 Laramie 4x4 Megacab Cummins
|
|
|
03-07-2019, 12:16 PM
|
#1675
|
Rivet Master
2012 27' Flying Cloud
W
, New England
Join Date: Oct 2012
Posts: 7,402
|
Al - I have the 2.5” stinger - it’s about 60#....the reducer sleeve and 2” stinger may be worth keeping [emoji3]
|
|
|
03-07-2019, 12:24 PM
|
#1676
|
2 Rivet Member
Northern
, Wisconsin
Join Date: Mar 2015
Posts: 33
|
Quote:
Originally Posted by SteveSueMac
|
Thank you! Exactly what I was looking for.
Given the price of the hitch, I think this should be something everyone considers getting and keeping with your trailer, you never know when you might need to use a standard ball hitch in your travels or when you'll need a repair. I'd rather spend $150 and not be the guy that's the pain the ass.
|
|
|
03-07-2019, 12:32 PM
|
#1677
|
2 Rivet Member
Peoria
, Arizona
Join Date: Nov 2014
Posts: 96
|
Quote:
Originally Posted by dustent
Thank you! Exactly what I was looking for.
Given the price of the hitch, I think this should be something everyone considers getting and keeping with your trailer, you never know when you might need to use a standard ball hitch in your travels or when you'll need a repair. I'd rather spend $150 and not be the guy that's the pain the ass.
|
Thought about that too keeping in mind this warning from PP:
WARNING: NOT FOR ROAD USE. DO NOT TOW ON ROADS WITH ORANGE PARTS INSTALLED. 5 MPH MAX SPEED.
__________________
'24 Silverado 2500 Diesel 4x4 ZR2, 2018 FC 28W (Queen) Landmark Truffle, ProPride Hitch, 3" Dexter Lift, Centramatics
|
|
|
03-07-2019, 07:50 PM
|
#1678
|
2020 Classic 33
Box Elder
, South Dakota
Join Date: Oct 2013
Posts: 1,731
|
For measuring I cut a piece of 3/4 PVC to the correct length (6.5 inches) and put a piece of cord on one end. Easy to hold in place until the bottom of the jack just passes the pvc. Hold the PVC in one hand and use a 20v cordless Porter Cable drill on low setting in the other hand.
__________________
Gary
2020 Classic 33 Twin, 2019 Ram 3500 Longhorn, ProPride
NØVPN
|
|
|
03-07-2019, 10:52 PM
|
#1679
|
Rivet Master
South East
, Michigan
Join Date: Apr 2016
Posts: 552
|
Quote:
Originally Posted by ghaynes755
For measuring I cut a piece of 3/4 PVC to the correct length (6.5 inches) and put a piece of cord on one end. Easy to hold in place until the bottom of the jack just passes the pvc. Hold the PVC in one hand and use a 20v cordless Porter Cable drill on low setting in the other hand.
|
I used a paint pen and put a line on the inside pipe of the jack. It does get some wear, so I may need to re-apply sooner or later.
__________________
Al
2017 29' SOB, 2022 Platinum F-150 SCrew, ProPride
|
|
|
03-08-2019, 05:30 AM
|
#1680
|
2 Rivet Member
Peoria
, Arizona
Join Date: Nov 2014
Posts: 96
|
Quote:
Originally Posted by SailorSam205
I used a paint pen and put a line on the inside pipe of the jack. It does get some wear, so I may need to re-apply sooner or later.
|
I did the same, marking several locations on the jack 1/2" apart for easy adjustment. Marks last a while before needing a touch up.
__________________
'24 Silverado 2500 Diesel 4x4 ZR2, 2018 FC 28W (Queen) Landmark Truffle, ProPride Hitch, 3" Dexter Lift, Centramatics
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|