After chasing leaks and finding a crack in the threads on the valve body, I've ended up pulling and replacing the original shower valve on our 69 tradewind and replacing it with a modern unit.
If someone is needing valve stems (will need new washers) they are in reasonable shape, as are the handles and trim rings.
Please let me know, you're welcome to them for the cost of shipping.
I'll be happy to take and email photos if there is someone that can use the pieces.
After chasing leaks and finding a crack in the threads on the valve body, I've ended up pulling and replacing the original shower valve on our 69 tradewind and replacing it with a modern unit.
If someone is needing valve stems (will need new washers) they are in reasonable shape, as are the handles and trim rings.
Please let me know, you're welcome to them for the cost of shipping.
I'll be happy to take and email photos if there is someone that can use the pieces.
Would a 69 would have been Moen.? Could also be a company called Harcraft or an old Ohio company called Empire. Either one would be valuable parts for a staunch vintage owner. Thanks for offering them here.
Here's the valve stems, handles, retainer rings and hose elbow. I know it was original, and clearly I was the first to attempt to remove it . There are no identifying numbers or brand markings on any of the pieces. The valve body which is out in the truck's scrap pile with cracks in the input threads. Its a standard H shaped valve.
The chrome is in much better shape than it shows, just didn't clean them up after the liquid wrench etc to get it all apart.
This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.