Stabilizers Bent

[earlwalker]

On a recent trip I ran over a curb and bent both stabilizers on my 1993 Sovereign. I understand that the originals are no longer available. Does anyone have any suggestions for replacement?

[dznf0g]

A little more information is needed.

[Jim J]

On my 2014 Flying Cloud the stabilizer can be disassembled and the arms can be replaced or straightened. Maybe yours can as well.

A good welding or blacksmith shop can straighten the pieces for you.

[Rich W]

Originally Posted by earlwalker

On a recent trip I ran over a curb and bent both stabilizers on my 1993 Sovereign. I understand that the originals are no longer available. Does anyone have any suggestions for replacement?

No idea what they look like, can you post a picture? Like Jim says, a welder or blacksmith can probably repair them. I removed mine and repainted them and there was some minor straightening in a bench vise. They aren't supports, just stabilizers so they don't bear much weight.

[ROBERT CROSS]

I welded two of these on the rear frame of our first AS, a '63 22' Safari. (it came with two jack stand style)
Just select the one that works best.

Bob
🇺🇸

[earlwalker]

Thanks to everyone for your replies. I took both stabilizers to a machine shop. They said they could straighten them.

[LY31]

I just purchased one for my '77 Sovereign at an Airstream dealer. Jack is made by Bal. It cost me $75.00. It's cheaper than getting it fixed.

[earlwalker]

The machine shop straightened both stabilizers for only $113.00 and they work perfectly.