I have a Norcold refrigerator that was installed new just before I bought my trailer in January. It seems to work fine on AC and even on LP until I pull the trailer. I can switch to LP a note that the flame is present, yet when I pull and stop I have the flashing signal "no flame" and sure enough it is true,the flame is gone. Any sugestions as to the cause of my problem?
Assuming there is nothing unusual about how much wind is getting behind the refrigerator, it would be a good idea to check the regulated pressure of the propane.
If the flame is weak or marginal, it may be prone to blowing out and failing to restart.
Seems to me this is a problem and some were using a flap or baffle to help with the wind. Hopefully someone else will chime in with the correct info, please. zz
This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.