Fridge presentation at Salem

[Al and Missy]

At the Salem opening dinner we sat at the same table as Tim who was giving a presentation on improvements one could make to the Dometic fridges. Unfortunately we could not attend the presentation. Did anyone here attend, and was there anything useful in the presentation? I checked the WBCCI web site but there was nothing available for his presentation.

I gather from the dinner conversation that he had provided better thermal separation between the burner and the condenser fins in the rear but would like to get some specifics.


Thanks,

Al

[DKB_SATX]

Tim is Tim Kendziorski. He's in the WBCCI digital directory, send him an email and see if he has a write-up of his presentation. He's been doing it for a while, I saw it several years ago at the RM VAC rally in Gunnison. The modifications he proposes make good sense but I don't remember the specific details well enough to confidently say "Do this and that." You would have to pull your fridge out of its enclosure to do the upgrades, I think.

[Al and Missy]

Originally Posted by DKB_SATX

Tim is Tim Kendziorski. He's in the WBCCI digital directory, send him an email and see if he has a write-up of his presentation. He's been doing it for a while, I saw it several years ago at the RM VAC rally in Gunnison. The modifications he proposes make good sense but I don't remember the specific details well enough to confidently say "Do this and that." You would have to pull your fridge out of its enclosure to do the upgrades, I think.

Thanks David,
I did look him up and send him an e-mail but so far no response. Maybe he is without Internet connection for some reason. There were multiple e-mail addresses and I only sent to one so I will hit the others as well.


Al

[DKB_SATX]

Originally Posted by Al and Missy

Thanks David,
I did look him up and send him an e-mail but so far no response. Maybe he is without Internet connection for some reason. There were multiple e-mail addresses and I only sent to one so I will hit the others as well.


Al

He works an odd schedule and it's been a couple weeks since I recall seeing him on an ECC email chain so he may be traveling still.