Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 

Go Back   Airstream Forums > Airstream Restoration, Repair & Parts Forums > Repairing/Replacing Floor &/or Frame
Click Here to Login
Register Vendors FAQ Community Calendar Today's Posts Search Log in

Reply
 
Thread Tools Search this Thread Display Modes
 
Old 01-26-2012, 01:46 PM   #21
Master of Universe
 
Gene's Avatar
 
2008 25' Safari FB SE
Grand Junction , Colorado
Join Date: Sep 2007
Posts: 12,711
The factory changes what it does from to time to time, sometimes with little thought behind it. I have been told the opposite—some glue, not much.

Gene
Gene is offline   Reply With Quote
Old 01-26-2012, 02:00 PM   #22
Rivet Master
 
1994 30' Excella
Mississauga , Ontario
Join Date: Jun 2004
Posts: 1,244
Could be different sheet goods. Some are meant to be dry laid. That said, they expect that only baseboard or quarter round is installled to hold the edges down.
The trailer installation is different and this shows that only time exposes all the limitations of new products and techniques.
Al
__________________
Al and Jean

TAC ON-3
BigAl is offline   Reply With Quote
Old 01-27-2012, 02:08 PM   #23
Rivet Master
 
1981 31' Excella II
New Market , Alabama
Join Date: Sep 2011
Posts: 6,145
When you get this sorted out I would strongly consider using some sort of heater inside the trailer to keep the inside of the trailer at or above freezing. I have winterized my trailer and it barely gets below 30 for extended periods of time but I have a smaller thermostatically controlled space heater on low heat that runs when it gets really cold. There are other things in the trailer that don't like being kept below freezing. Plastics turn to glass and condensation or other moisture turns to ice. Plastics get hard and shrink which causes stresses and since the plastic is now glass instead of plastic, it cracks.

Perry
perryg114 is offline   Reply With Quote
Old 01-27-2012, 02:23 PM   #24
Moderator
 
DKB_SATX's Avatar

 
2017 26' Flying Cloud
Alamo Heights , Texas
Join Date: Aug 2006
Posts: 8,536
Images: 1
Blog Entries: 7
Quote:
Originally Posted by perryg114 View Post
When you get this sorted out I would strongly consider using some sort of heater inside the trailer to keep the inside of the trailer at or above freezing. I have winterized my trailer and it barely gets below 30 for extended periods of time but I have a smaller thermostatically controlled space heater on low heat that runs when it gets really cold. There are other things in the trailer that don't like being kept below freezing. Plastics turn to glass and condensation or other moisture turns to ice. Plastics get hard and shrink which causes stresses and since the plastic is now glass instead of plastic, it cracks.

Perry
While I suspect it would avoid a repeat incident, it might be impractical to maintain a +70F differential. I suspect that even at 0F the floor wouldn't have had the same problem, though, so it shouldn't be necessary to keep it above freezing, just above oh-my-lord-that's-cold -40.

Those sorts of temperatures put my kvetching about Texas summers into perspective... but I still look forward to a time when I can leave Texas for most of the summer!
__________________
— David

Zero Gravitas — 2017 Flying Cloud 26U | WBCCI# 15566

He has all of the virtues I dislike and none of the vices I admire. — Sir Winston Churchill
DKB_SATX is offline   Reply With Quote
Old 01-27-2012, 03:25 PM   #25
Master of Universe
 
Gene's Avatar
 
2008 25' Safari FB SE
Grand Junction , Colorado
Join Date: Sep 2007
Posts: 12,711
The cost of running a space heater in wintry climates would be very high. Of course, the damage costs can be high too.

Our TV says it is good to -4˚ F; I have left it in the trailer for 4+ winters and sometime the temps go to -15 or lower, but I figure they give you some slack. I hope I am right.

I have been in summer cabins where there was no heat and after decades the furniture glue gives up, the wood warps, and the building interior starts to warp too. This is why they heat and cool storage buildings.

Gene
Gene is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Newbie needs soft floor repair advice lbdesign Repairing/Replacing Floor &/or Frame 21 11-09-2020 03:47 AM
Advice needed on water leak and sub floor damage on 08 Int'l Westfalia Repairing/Replacing Floor &/or Frame 9 03-20-2012 05:25 PM
Floor replacement question: to do it right the first time! Eric H Repairing/Replacing Floor &/or Frame 7 12-06-2011 09:19 AM
Trying to decide on floor insulation or none at all perryg114 Repairing/Replacing Floor &/or Frame 1 09-20-2011 01:52 PM
Mismatch of floor and outrigger width MtnMDStan Repairing/Replacing Floor &/or Frame 3 06-19-2011 02:44 PM


Featured Campgrounds

Reviews provided by

Disclaimer:

This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.



All times are GMT -6. The time now is 12:08 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.