Need a little advice....my motorhome has many rounded areas so attaching picture frames is limited to small items....has anyone found a good fastner system where the frames can't be drilled and a clip or fastner is needed, i.e. typical art metal frames....I also realize that plexiglas is the only safe material for breakage problems...thank you, jem
__________________
The Silver Buffalo
Saturn with Blue OX towbar
WBCCI # 14067
Most metal frames the backing slids out. You could fasten the backing to the wall and then slide the fame on it. Should keep it snug enough that it wouldn't slide off.
It it's the type that has the clips you turn you could put a spacer under the backing to give you just enough room to get your pinky under the frame to turn the clip.
__________________
1959 22' Caravanner
1988 R20 454 Suburban.
Atlanta, GA
This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.