|
09-22-2008, 05:49 AM
|
#1
|
3 Rivet Member
1998 34' Limited
ont
, Ontario
Join Date: Jun 2007
Posts: 229
|
Has anyone matched factory flooring in 1998?
My 1998 34' ltd has hardwood in the kitchen and carpet everywhere else. (see my profile pic for example)
I want to change the carpet to either laminate or allure trafficmaster, but I'd like to match as closely as possible the colour of the kitchen floor. Does anyone have any recommendations? Do you think it will look weird together if I do the allure?
|
|
|
02-11-2009, 11:48 AM
|
#2
|
3 Rivet Member
1998 34' Limited
ont
, Ontario
Join Date: Jun 2007
Posts: 229
|
Bumpity bump! just wondering if anyone has any experience with this and do you like the result?
|
|
|
02-11-2009, 04:16 PM
|
#3
|
Rivet Master
2001 34' Limited S/O
Moyock
, North Carolina
Join Date: Feb 2004
Posts: 1,010
|
I have a 2001 34' and have a similar situation. I am thinking about a darker piece of wood where the carpet meets the oak this would be run from side to side then pick up from there with the other flooring material. Right now I am leaning towards cork. Let me know how your project goes.
__________________
Keep the shiny side up.
WBCCI # 348
Past Region 3 President
Past President Tidewater Unit 111
Rick Bell in "Silverbell"
|
|
|
02-11-2009, 07:45 PM
|
#4
|
on the hunt
Currently Looking...
riverton
, Kansas
Join Date: Nov 2007
Posts: 373
|
My wife and i went to Lowe's and bought the cheapest laminate flooring they had and it match the cabinets pretty good.
|
|
|
02-12-2009, 03:58 AM
|
#5
|
3 Rivet Member
1998 34' Limited
ont
, Ontario
Join Date: Jun 2007
Posts: 229
|
would love to see pics if anyone has any! Did you replace carpet in the bathroom osolow? What do you do with that spot behind the toilet where the carpet goes up the wall a few inches? Tarheel I love the look of the cork but I wonder how it would stand up to dog and kid? Here is what I have now:
|
|
|
02-12-2009, 10:03 AM
|
#6
|
Rivet Master
1972 25' Tradewind
North Vancouver
, British Columbia
Join Date: Feb 2006
Posts: 3,421
|
Honestly, for the price of the materials (Allure is very inexpensive), I'd just take up the wood in the kitchen as well and then lay new flooring for the full length in the colour that you like. For the record, cork stands up better than most natural floors (even when kids and dogs are factored into the equation). If you do select hardwood (either solid or engineered) it is important to recognize that it will scratch. I always recommend to my clients that if they want a dark floor, start with a dark wood, like walnut because when the finish is scratched, it won't jump out at you like a light wood that's been stained dark.
__________________
Cameron & the Labradors, Kai & Samm
North Vancouver, BC
Live! Life's a banquet and most poor suckers are starving to death! - Mame Dennis
|
|
|
02-12-2009, 03:30 PM
|
#7
|
3 Rivet Member
1998 34' Limited
ont
, Ontario
Join Date: Jun 2007
Posts: 229
|
That is interesting about the cork, thanks cameront120. I will read up more on it.
I was planning on paying someone to do it (due to a combination of no time and fear of doing it myself). My guy said removing the hardwood will cost more so I was planning on keeping it. Now I am not sure, on the one hand I love the look of all one type of flooring, but on the other hand I can live with different floors to save some money I guess! The latter consideration ($$) will probably win out!
|
|
|
02-12-2009, 04:52 PM
|
#8
|
Rivet Master
1972 25' Tradewind
North Vancouver
, British Columbia
Join Date: Feb 2006
Posts: 3,421
|
Another consideration is that your existing hardwood will be considerably thicker than the Allure or cork. This will leave you with a tripping hazard, unless you can provide a reducer strip of some sort. The allure is dead easy to install. It's a floating floor with self-adhesive strips, just cut and lay it down. Is the existing floor glued down, or just stapled? Removal should be relatively simple, either way.
__________________
Cameron & the Labradors, Kai & Samm
North Vancouver, BC
Live! Life's a banquet and most poor suckers are starving to death! - Mame Dennis
|
|
|
02-13-2009, 06:21 AM
|
#9
|
3 Rivet Member
1998 34' Limited
ont
, Ontario
Join Date: Jun 2007
Posts: 229
|
cameront I remember from your other posts that you are an architect? I sit at a computer and mangle data all day (I am a statistician and my better half is a programmer). Home reno's that we undertake usually need to be repaired afterwards by a professional. I am good at painting though. Do you think I can do this myself? I would be willing to give it a try but I am afraid of the bathroom - don't I have to remove the toilet to do this?
But... maybe I can save some money by pulling almost everything out and then letting a pro finish it (and fix any bad floor spots that show up). Thanks for bringing up the trip hazard, I think I will remove the kitchen floor and replace it all. Going to search out the cork options now!
If I get this done it will be in April so I'l post pics then!
Redstart
|
|
|
02-13-2009, 06:53 AM
|
#10
|
3 Rivet Member
1998 34' Limited
ont
, Ontario
Join Date: Jun 2007
Posts: 229
|
p.s. i meant no offence to my fellow geeks out there who ARE handy! Are you out there?
|
|
|
02-13-2009, 06:50 PM
|
#11
|
Rivet Master
1972 25' Tradewind
North Vancouver
, British Columbia
Join Date: Feb 2006
Posts: 3,421
|
I'm a total Geek and am willing try to do things myself. If I get stumped, I just ask the good folks here and post pictures to illustrate my problem. So far I have blown anything up. I'm not very mechanical though and electrical things mystify me.
__________________
Cameron & the Labradors, Kai & Samm
North Vancouver, BC
Live! Life's a banquet and most poor suckers are starving to death! - Mame Dennis
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|