bath repair

[mpc]

was wondering if anyone could give me a site to find replacment bath countertop and seating area for a 73 tradewinds. havent had much luck in finding them.

[goransons]

eBay Motors: Airstream bathroom sink and faucet (item 220154336033 end time Oct-01-07 10:49:45 PDT)

not sure if the different models that year had different ones, but this one is on ebay.

[mpc]

thanks, i saw that 1 also but not the same. i do appreciate the reply

[Inland RV Center, In]

Originally Posted by mpc

was wondering if anyone could give me a site to find replacment bath countertop and seating area for a 73 tradewinds. havent had much luck in finding them.

Why do you need replacements?

The plastic bathroon furniture can easily be repaired.

Andy

[mpc]

thanks andy, my wife and i are discussing painting the countertop and i found 1 crack in the shower seat which i know i can epoxy from the back and will look good so that is what we will probably work on.

[bambo]

Andy, I may be contacting you...we have just returned from our first real rally and I have just been out cleaning up our '75 Tradewind. I could barely wait to get rid of the unsightly glued and velcroed on plastic basket and soap dish the PO had applied...so I carefully removed them both. Only to find under the glued on (and screwed on) soap dish two large cracks all the way through. They tried to grout them maybe, and then hide them? What I thought was glue was actually that plastic grout type stuff that is around the inside of the bathroom window as well. It would be nice to somehow repair the counter top rather than replace it, if possible. It's on the counter, near the shower. Any advice would be greatly appreciated. I have already learned that I can gently, with 600 grit sandpaper, remove the unsightly rings on the counter (haven't done it yet of course...I am so glad to have this forum to get help!! Frankie

[CJ of Okla]

I am gutting our bathroom out to replace the floor. Have found two cracks one in the seating area around the toilet opening the second is in the bend of the bathtub front panel. I have tried to read various methods on the forum to repair, but some are 3-4 years old. As there are new products out there now what is the best product to repair ABS Plastic?