Visit our Popular Forums

wahoonc · 03-31-2005, 04:15 PM

Quote:

Originally Posted by mediaetc

This may be one of my problems. Has anyone a clue how to fix this? The lens is ok, but the socket is bad news.

I am not positive, but IIRC if you remove the aluminum housing you will find that is a standard truck light fixture behind the housing and can be easily replaced, BTW I see the sillycone in the picture, you will need to remove ALLLLLL of it before any thing else will stick.

Aaron

1956Safari · 03-31-2005, 04:25 PM

Thanks for the ideas and yes the PO LOVED Silicon it seems.

balrgn · 03-31-2005, 04:47 PM

Quote:

Originally Posted by mediaetc

Thanks for the ideas and yes the PO LOVED Silicon it seems.

Might want to stock up on this

http://shopping.netsuite.com/s.nl/c....it.A/id.798/.f

1956Safari · 03-31-2005, 07:16 PM

More places for leaks.... These brackets are also loose. Should I remove and remount? or wait for them to fall off while under sail? I still can't figure out how to setup the awning!

Jim & Susan · 03-31-2005, 07:39 PM

Quote:

Originally Posted by mediaetc

More places for leaks.... These brackets are also loose. Should I remove and remount? or wait for them to fall off while under sail? I still can't figure out how to setup the awning!

A couple of questions (maybe I missed it, above). Are you planning to remove your interior skins? If you do, you will probably find (as I have) lots of things to worry about. I have all of mine out now, and I'm finding small leaks in lots of places. The only major leak I have found is around one of the running lights on the front. A few pics..... My awning mounts are rough looking, like yours, but unbelievably, they don't leak. They will have to be addressed as part of the rebuild. Good Luck.

Jim