Umbilical cord
If your trailer still has the original connector (7 round pin female). You can just cut the cord and use the old 7 wires to note the location (color) in the plug. Then remove the access panel from your belly skin and note what color wire goes where. Clean the connectors in the plug and convert the recepticle on your tow vehicle to a 7 pin male. (The round connectors don't corode and lose contact as easily as the flat blade connectors do). Hook it all back up after lubing the connector pins with dielectric grease and you should be good to go. Ed
__________________
1967 Safari Twin "Landshark" w/International trim package
2014 GMC Sierra 1500 Double Cab SLE
FORUMS MEMBER SINCE 12/16/2004AIR#7110
"My tire was thumping, I thought it was flat. When I looked at the tire, I noticed your CAT!" Burma Shave
|