|
|
04-03-2015, 08:31 PM
|
#21
|
Rivet Master
1999 34' Excella
Currently Looking...
Hillsboro
, Texas
Join Date: Feb 2013
Posts: 6,408
|
She will have all the big problems fixed by the time she gets home!
__________________
Peace and Blessings..
Channing
WBCCI# 30676
|
|
|
04-03-2015, 10:31 PM
|
#22
|
Rivet Master
1984 34' International
Toronto
, Ontario
Join Date: Jul 2012
Posts: 1,499
|
Glorious. Be safe.
|
|
|
04-04-2015, 06:24 AM
|
#23
|
Dazed and Confused
Currently Looking...
1983 31' Airstream310
Hillsburgh
, Ontario
Join Date: Sep 2012
Posts: 3,805
|
I have had an oil pressure gauge show zero three times in my life; twice due to bad sending units and once due to a bolt coming loose on the oil cooler on my brand spanking new 88 Silverado. I luckily happen to see the needle bounce twice before hitting bottom, clutched in, turned the engine off and coast to the next town. Needless to say I didn't need to get oil rustproofing done that year as the oil was everywhere under the truck.
All three managed to get the pumper going right quick though.
PS The gauge to watch closely also is the temp gauge as these motors hate running hot.
All the best on your new journey.
Cheers
Tony
__________________
Per Mare, Per Terram and may all your campaigns be successful.
“It’s a recession when your neighbor loses his job; it’s a depression when you lose your own.” "Harry S Truman"
|
|
|
04-04-2015, 08:20 AM
|
#24
|
2 Rivet Member
Currently Looking...
1983 31' Airstream310
CA
, California
Join Date: Mar 2014
Posts: 51
|
I am on the road again. Wire fell on something hot and melted. All fixed up now. Yeah. Shorty Bears Safety Service in Amarillo Texas. Love them.
|
|
|
04-04-2015, 10:25 PM
|
#25
|
2 Rivet Member
Currently Looking...
1983 31' Airstream310
CA
, California
Join Date: Mar 2014
Posts: 51
|
426 miles today after it was fixed. I think I will call this my Walmart tour. In Gallup New Mexico for the might.
|
|
|
04-04-2015, 10:26 PM
|
#26
|
Rivet Master
1999 34' Excella
Currently Looking...
Hillsboro
, Texas
Join Date: Feb 2013
Posts: 6,408
|
Sleep well! Hope you make it home for Easter!
__________________
Peace and Blessings..
Channing
WBCCI# 30676
|
|
|
04-05-2015, 10:39 PM
|
#27
|
2 Rivet Member
Currently Looking...
1983 31' Airstream310
CA
, California
Join Date: Mar 2014
Posts: 51
|
517 miles today. Out of New Mexico, all of Arizona and into California. Slow going up the hills. I may have watched the gauges too closely... It feels good to be in Cali. Spending my first night in a rest stop. The Desert Oasis outside Barstow CA. So tired and ready to be home. 404 miles to get home tomorrow. I can not wait to take this out with my family and start testing and using all the systems.
So far I have learned some quirks like how to make the drivers seat sit up for an hour or two and how to close the door properly.
Oh, 14.5 mph. I like that.
|
|
|
04-05-2015, 10:53 PM
|
#28
|
Rivet Master
1999 34' Excella
Currently Looking...
Hillsboro
, Texas
Join Date: Feb 2013
Posts: 6,408
|
14.5 mpg?
__________________
Peace and Blessings..
Channing
WBCCI# 30676
|
|
|
04-06-2015, 12:27 PM
|
#29
|
Rivet Master
1997 30' Excella
1961 26' Overlander
1954 22' Flying Cloud
1981 28' Airstream 280
San Antonio
, Texas
Join Date: Jul 2009
Posts: 1,436
|
I believe it was mentioned it was a diesel.
__________________
Bruce
WBCCI# 9259 AIR# 38927 TAC-TX 14
Stop Littering-Spay & Neuter-- Adopt From Rescue
No amount of time will erase the memory of a great dog.
|
|
|
04-06-2015, 02:10 PM
|
#30
|
2 Rivet Member
Currently Looking...
1983 31' Airstream310
CA
, California
Join Date: Mar 2014
Posts: 51
|
Yep. Diesel. Slow diesel.
|
|
|
04-06-2015, 05:16 PM
|
#31
|
2 Rivet Member
Currently Looking...
1983 31' Airstream310
CA
, California
Join Date: Mar 2014
Posts: 51
|
Pics from today and yesterday.
|
|
|
04-06-2015, 10:24 PM
|
#32
|
2 Rivet Member
Currently Looking...
1983 31' Airstream310
CA
, California
Join Date: Mar 2014
Posts: 51
|
I am home. Took hubby and son for a drive on West Cliff to see the ocean then tried to figure out how to get it in the driveway. That was hard. I think we need to buy little ramps for in and out. Big ramps. Also, the gate is in the middle of the driveway and neither side is long enough for the airstream. We knew that though and plan to build a new one taller and closer too the street so the airstream is behind it. Tonight it hangs into the sidewalk a little and the gate is open. But I am home and safe. We have to take care of this one because I am not doing that again.
|
|
|
04-06-2015, 10:38 PM
|
#33
|
1987 Avion 34W owner
Vintage Kin Owner
Good Ol'
, USA
Join Date: Mar 2014
Posts: 2,090
|
You did a great job of getting that MH home. Very few wives would have attempted that!
__________________
I this great country!!!!
1987 Avion 34W
1995 Ford F250 7.3L PowerStroke
|
|
|
04-06-2015, 11:02 PM
|
#34
|
Rivet Master
1994 36' Classic 36 Diesel
Colorado Springs
, Colorado
Join Date: Mar 2012
Posts: 883
|
Lanikai,
Nicely done. What motivated you to try this?
__________________
1994 36' Classic Diesel Pusher
|
|
|
04-06-2015, 11:16 PM
|
#35
|
Rivet Master
Currently Looking...
_
, _
Join Date: Mar 2008
Posts: 2,385
|
Congrats!
Sent from my iPad using Airstream Forums
__________________
May a Firefly land upon your shoulder
and bring you good luck, good fortune, and abundance.
|
|
|
04-07-2015, 04:50 AM
|
#36
|
Dazed and Confused
Currently Looking...
1983 31' Airstream310
Hillsburgh
, Ontario
Join Date: Sep 2012
Posts: 3,805
|
Fantastic Consider yourself in a pretty elite club; albeit a pretty lonely club of one, as I know of only one other lady in her 70's that has taken a 325 on a long trip herself after her husband died. Luckily she knew her coach inside and out, which you didn't.
Very well done.
Cheers
Tony
__________________
Per Mare, Per Terram and may all your campaigns be successful.
“It’s a recession when your neighbor loses his job; it’s a depression when you lose your own.” "Harry S Truman"
|
|
|
04-07-2015, 10:06 AM
|
#37
|
2 Rivet Member
Currently Looking...
1983 31' Airstream310
CA
, California
Join Date: Mar 2014
Posts: 51
|
Waiting for old gate removal to fit all the way in. I am thinking about the motivation question. The short answer is stupidity. I will have to get back to you on the long answer.
|
|
|
04-07-2015, 07:13 PM
|
#38
|
Dazed and Confused
Currently Looking...
1983 31' Airstream310
Hillsburgh
, Ontario
Join Date: Sep 2012
Posts: 3,805
|
Quote:
Originally Posted by LaniKai
Waiting for old gate removal to fit all the way in. I am thinking about the motivation question. The short answer is stupidity. I will have to get back to you on the long answer.
|
I get the stupidity part, but as to really why, I maybe able to help.
This may give you a clue..........How many people gave you the thumbs up, hooted at you on the highway or gazed longingly at your coach while towing SOB white bread box; did anyone want to see inside or just stand there and take her all in....
Glad you made it home in one piece.
Cheers
Tony
__________________
Per Mare, Per Terram and may all your campaigns be successful.
“It’s a recession when your neighbor loses his job; it’s a depression when you lose your own.” "Harry S Truman"
|
|
|
04-07-2015, 07:14 PM
|
#39
|
Rivet Master
1999 34' Excella
Currently Looking...
Hillsboro
, Texas
Join Date: Feb 2013
Posts: 6,408
|
Bless you guys! Wish you all the best!!!
__________________
Peace and Blessings..
Channing
WBCCI# 30676
|
|
|
04-10-2015, 04:02 PM
|
#40
|
2 Rivet Member
Currently Looking...
1983 31' Airstream310
CA
, California
Join Date: Mar 2014
Posts: 51
|
Thank you.
Back at work, school and mothering this week. We ripped out our old driveway fence and hope to get started with the new one this weekend. Since it is mostly gate we might just buy a pre-fab one and figure it out ourselves. Not something we want to spend much time on, but will feel better once it is up. Protect the airstream and ourselves.
I will take sometime of next week and go to the DMV and hopefully take care of all the paperwork. Then we need to start the cleaning and assessing process. There are all kinds of things in it plus the dust of many years. I expect a few trash bags and a couple of free boxes to be removed. The previous owner left a lot of stuff.
I does not seem to have water damage, probably because it was kept inside. We need to replace almost all the seals I have seen, but our California drought is keeping it dry for now.
We also need to find local mechanics and systems help. Suggestions are welcome.
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|