|
|
10-09-2007, 10:37 PM
|
#1
|
4 Rivet Member
1964 22' Safari
Foresthill
, California
Join Date: Aug 2004
Posts: 257
|
Propane tank cover lock
Has anyone installed a lock on an aluminum propane tank cover box with plastic lid such as the tank covers used on newer Airstreams?
It has a spring loaded catch to close the lid. I’d like to install a lock to keep honest folks from even looking inside.
Does Airstream sell a locking mechanism or has anyone retrofitted a locking clasp?
|
|
|
10-10-2007, 05:38 AM
|
#2
|
Rivet Master
1971 27' Overlander
Central
, Ohio
Join Date: Jun 2006
Posts: 2,365
|
Inland RV has the clasp in a slightly different style that has a slot for a lock. Bought one this summer but net yet installed - looks like you'll have to drill a couple new holes - no big deal. Best part is it's stainless.
|
|
|
10-10-2007, 07:18 AM
|
#3
|
Rivet Master
Commercial Member
Vintage Kin Owner
Naples
, Florida
Join Date: Dec 2005
Posts: 7,508
|
Quote:
Originally Posted by walter1
Has anyone installed a lock on an aluminum propane tank cover box with plastic lid such as the tank covers used on newer Airstreams?
It has a spring loaded catch to close the lid. I’d like to install a lock to keep honest folks from even looking inside.
Does Airstream sell a locking mechanism or has anyone retrofitted a locking clasp?
|
Walt,
I have a lock that installs directly over the center threaded rod that holds down the tanks. Very clean and installs in about 5 seconds. Let me know if you would like a photo of it. I'll probably put it back in the classifieds in a week or so.
THANKS!
__________________
lewster
Solar Tech Energy Systems, Inc.
Victron Solar Components and Inverters, Zamp Solar Panels, LiFeBlue and Battle Born Lithium Batteries, Lifeline AGM Batteries
|
|
|
10-10-2007, 08:31 AM
|
#4
|
Halimer
2006 25' Classic
New Hyde Park
, New York
Join Date: Jan 2007
Posts: 244
|
I'd like to see it.
|
|
|
10-10-2007, 08:34 AM
|
#5
|
Site Team
2002 25' Safari
Dewey
, Arizona
Join Date: Mar 2005
Posts: 15,618
|
Quote:
Originally Posted by lewster
Walt,
I have a lock that installs directly over the center threaded rod that holds down the tanks. Very clean and installs in about 5 seconds. Let me know if you would like a photo of it. I'll probably put it back in the classifieds in a week or so.
THANKS!
|
I wanted to get one of those from you at the Fiesta, guess we were having too much fun. I'll get back with you after you get setup again in Florida. It was really great to meet you Lew!
__________________
Richard
Wally Byam Airstream Club 7513
|
|
|
10-10-2007, 09:24 AM
|
#6
|
LEV ZEPPELIN
2004 19' International CCD
Chicago
, Illinois
Join Date: Jan 2003
Posts: 1,048
|
I've heard of some people using a long bike cable and running it through the handles of the tanks and around the frame and locking that. I need to do this, since my storage place is sort non secured, and I'd hate to go out there sometime to find my tank(s) pilfered.
Jonathan
__________________
Sometimes I wish I were living in the stone age. Then I would know I'm the smartest person in the world.
|
|
|
10-10-2007, 10:02 AM
|
#7
|
4 Rivet Member
1964 22' Safari
Foresthill
, California
Join Date: Aug 2004
Posts: 257
|
Thanks for the help.
Yes, Lewster I’d like to see a photo and would be interested in purchasing a lock that installs directly over the center threaded hold down rod.
Also planning to cable those puppies down inside the box.
Sounds like Ganglin found what I want from GoodBuddy Andy. A stainless latch with lock slot to lock the box lid shut to keep curious eyes out.
I’m figuring if I lock the box, lock the tank mount rod AND cable lock the tank handles to the rack, the campground thieves of the world will walk on over to the next trailer to see what they have (sorry neighbor). Or they’ll break something.
Thanks
Walter
|
|
|
10-10-2007, 10:13 AM
|
#8
|
More than one rivet loose
Currently Looking...
Los Alamos
, New Mexico
Join Date: Feb 2006
Posts: 3,756
|
post photos!
__________________
Michelle TAC MT-0
Sarah, Snowball
Looking for a 1962 Flying Cloud
|
|
|
10-10-2007, 06:42 PM
|
#9
|
Rivet Master
Commercial Member
Vintage Kin Owner
Naples
, Florida
Join Date: Dec 2005
Posts: 7,508
|
Quote:
Originally Posted by thecatsandi
post photos!
|
Just as soon as I get back to FL. I'm pulling out at 0:dawn:30 tomorrow morning..........BACK ON THE ROAD AGAIN!
At least this is just a little hop........only 2000 miles to SW FL.
__________________
lewster
Solar Tech Energy Systems, Inc.
Victron Solar Components and Inverters, Zamp Solar Panels, LiFeBlue and Battle Born Lithium Batteries, Lifeline AGM Batteries
|
|
|
10-10-2007, 07:22 PM
|
#10
|
4 Rivet Member
2007 25' Safari FB SE
North/East
, New Jersey
Join Date: Nov 2006
Posts: 367
|
Quote:
Originally Posted by walter1
Has anyone installed a lock on an aluminum propane tank cover box with plastic lid such as the tank covers used on newer Airstreams?
It has a spring loaded catch to close the lid. I’d like to install a lock to keep honest folks from even looking inside.
Does Airstream sell a locking mechanism or has anyone retrofitted a locking clasp?
|
I solved the problem on my 2007 Safari by drilling a hole through the steel wingnut and the cover's aluminum cross-member and placing a padlock through the holes. Picture attached.
|
|
|
10-10-2007, 08:57 PM
|
#11
|
Rivet Master
2021 27' Globetrotter
Saint Louis
, Missouri
Join Date: Jan 2004
Posts: 1,108
|
Locking the tank cover seems like a bad idea to me.
How would you or emergency personnel get to the valves to shut them off in the event of a fire?
The lock Lew has is a much better solution IMO.
__________________
Dennis
BRN #20321 Air #4056
"Oooh - They have the Internet on computers now!" - Homer Simpson
|
|
|
10-10-2007, 10:55 PM
|
#12
|
4 Rivet Member
1964 22' Safari
Foresthill
, California
Join Date: Aug 2004
Posts: 257
|
Thanks for the ideas. 2dabeach’s lock setup looks great. Simple form following function.
My "wingnut" is a ‘70s solid cast aluminum piece.
This gets me engineering. For now the tanks are cable locked.
What is the white bracket inside the box under the cross member for?
Would like to see photos of what Lew’s lock setup looks like.
Thanks for the thoughts
Walter
|
|
|
10-11-2007, 12:05 AM
|
#13
|
Site Team
2002 25' Safari
Dewey
, Arizona
Join Date: Mar 2005
Posts: 15,618
|
I remember seeing Lew's post in the classifieds some time back. It was a little like a wheel lock for your car. It attached to the shaft and prevented the removal of the nut without a key. It was small and did not look bad at all. I am upset that I did not get one from Lew at the Balloon Rally.
Lew, I have not been to Costco for the LED flashlight either....
__________________
Richard
Wally Byam Airstream Club 7513
|
|
|
10-11-2007, 07:54 AM
|
#14
|
Rivet Master
Commercial Member
Vintage Kin Owner
Naples
, Florida
Join Date: Dec 2005
Posts: 7,508
|
Richard,
Better get crackin' !!
__________________
lewster
Solar Tech Energy Systems, Inc.
Victron Solar Components and Inverters, Zamp Solar Panels, LiFeBlue and Battle Born Lithium Batteries, Lifeline AGM Batteries
|
|
|
10-11-2007, 09:06 AM
|
#15
|
4 Rivet Member
2007 25' Safari FB SE
North/East
, New Jersey
Join Date: Nov 2006
Posts: 367
|
Quote:
Originally Posted by walter1
Thanks for the ideas. 2dabeach’s lock setup looks great. Simple form following function.
My "wingnut" is a ‘70s solid cast aluminum piece.
This gets me engineering. For now the tanks are cable locked.
What is the white bracket inside the box under the cross member for?
Would like to see photos of what Lew’s lock setup looks like.
Thanks for the thoughts
Walter
|
Walter
The white bracket is the mounting plate that holds the outdoor sensor for our indoor/outdoor wireless thermometer mounted inside our trailer.
|
|
|
10-11-2007, 10:22 AM
|
#16
|
4 Rivet Member
2011 30' Classic
Kingwood
, Texas
Join Date: Mar 2007
Posts: 262
|
What a clever place to put the sensor! Does it read true there or does enclosing it in the box raise the temperature?
|
|
|
10-11-2007, 12:43 PM
|
#17
|
4 Rivet Member
2007 25' Safari FB SE
North/East
, New Jersey
Join Date: Nov 2006
Posts: 367
|
Quote:
Originally Posted by extiger
What a clever place to put the sensor! Does it read true there or does enclosing it in the box raise the temperature?
|
Extiger
The temperature may run a little high if the trailer is parked where the sun is hitting the front of the tank cover. We haven’t noticed any unusual readings on the outside temperature while living in the trailer for 3+ months. The main thing is that the unit is out of the way and is keep dry. The holder is attached to the cover with Velcro and we take the sensor out of the holder when we're traveling.
|
|
|
10-11-2007, 06:46 PM
|
#18
|
Haze Grey & Underway
2008 27' Safari FB SE
Cedar Crest
, New Mexico
Join Date: Sep 2007
Posts: 13
|
Just another take on a low tech locking system
I just got my airstream and have not road tested the pictured system. I used these locks on my old trailer to lock the tanks and looks like they might work here as well. By the way the two locks are keyed the same and the black is just electrical tape for padding/insulation.
Sorry, I do not have the photo on the net so I am not sure how to attach it. Basically I took two long shank locks and hooked them through one another and then one on each side of the threaded upright. Advantage is no drilling required and fairly cheap. R/ Dave
|
|
|
10-11-2007, 08:21 PM
|
#19
|
"Cloudsplitter"
2003 25' Classic
Houstatlantavegas
, Malebolgia
Join Date: Jun 2007
Posts: 20,000
|
Now Thats A Simple Solution
Quote:
Originally Posted by 2dabeach
I solved the problem on my 2007 Safari by drilling a hole through the steel wingnut and the cover's aluminum cross-member and placing a padlock through the holes. Picture attached.
|
THAT WORKS FOR ME!!!
__________________
I’m done with ‘adulting’…Let’s go find Bigfoot.
|
|
|
10-11-2007, 09:19 PM
|
#20
|
More than one rivet loose
Currently Looking...
Los Alamos
, New Mexico
Join Date: Feb 2006
Posts: 3,756
|
I wish my tanks were set up that way. My "wing" nut sits flush against the top. no room for the lock.
__________________
Michelle TAC MT-0
Sarah, Snowball
Looking for a 1962 Flying Cloud
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|