|
10-03-2007, 08:45 AM
|
#1
|
1 Rivet Member
1971 25' Tradewind
owosso
, Michigan
Join Date: Jul 2007
Posts: 6
|
"Land Yacht" Emblem
Hello everyone,
Our 1971 Tradewind is missing the passenger side "Land Yacht" emblem. We lost it on our first trip out. Just about killed me. Nearly bought a whole trailer last week just to get that part. If anyone has any ideas where to find one, I really would appreciate the help! Also trying to find a rack for the Magic Chef oven!
Thanks! John
Picasa Web Albums - John - Airstream
|
|
|
10-03-2007, 09:44 AM
|
#2
|
Rivet Master
2006 25' Safari FB SE
St. Cloud
, Minnesota
Join Date: Aug 2003
Posts: 13,280
|
Hello John -- It won't be easy. I've heard Tim, Colin & Rob discuss this on theVAP.com. Short of buying a parts trailer they cruise eBay for Airstream parts regularly. This is easier for them because they have multiple trailers (dozens in Colin's case).
|
|
|
10-03-2007, 09:47 AM
|
#3
|
Rivet Master
2003 22' International CCD
Kiln
, Mississippi
Join Date: Dec 2005
Posts: 2,779
|
Have to ask - Was it stolen? How do you lose one that has 4 rivets holding it on? Wow, a market for old emblems...........
__________________
Michael & Tina with Layla and Preston BZ The family has grown. 2003 22' INTERNATIONAL CCD
|
|
|
10-03-2007, 10:45 AM
|
#4
|
Remember, Safety Third
1973 27' Overlander
Catfish Corners
, Georgia
Join Date: Oct 2004
Posts: 5,720
|
If his '71 is like my '73, those are not riveted. The backside of the emblem has several "pegs" on there and they go thru the outer skin and are held on with a simple push-nut (I think that's what you call 'em). The metal pegs become worn over time and will break. I'll bet that's what happened to his.
The Airstream letters on the front and back of mine are attached in the same manner. I've had to rework some of them and reattach them as the pegs broke off as I was attempting clean and reseal them.
Jim
On edit: try Colaws RV salvage, the usually have a parts trailer or two laying around.
|
|
|
10-03-2007, 01:24 PM
|
#5
|
Rivet Master
1991 34' Excella
1963 26' Overlander
1961 26' Overlander
Central
, Mississippi
Join Date: Nov 2006
Posts: 5,919
|
When you start looking for a replacement don't forget that the left emblem is different than the right
|
|
|
10-07-2007, 05:21 PM
|
#6
|
1 Rivet Member
1971 25' Tradewind
owosso
, Michigan
Join Date: Jul 2007
Posts: 6
|
The piece had the two front rivets ( or push pins) loose and apparently the wind did the rest. Vernon I can't for the life of mny figure out how the two sides differ as you mention. i was going to have a left cast (reproduced) from the right. Help? Thanks John
|
|
|
10-07-2007, 07:46 PM
|
#7
|
Remember, Safety Third
1973 27' Overlander
Catfish Corners
, Georgia
Join Date: Oct 2004
Posts: 5,720
|
Easy, take a small American flag and place it over the existing emblem with the star field oriented to the front of the Airstream. Look at which side of the flag is lying against the Airtream aluminum. Now, walk around to the other side of the Airstream and place the same side of the flag against the aluminum. The flag will now be "flying backwards". Get it?
Jim
|
|
|
10-08-2007, 01:41 PM
|
#8
|
Rivet Master
Vintage Kin Owner
Vintage Kin Owner
Vintage Kin Owner
Currently Looking...
Greeeneville
, Tennessee
Join Date: Feb 2005
Posts: 1,301
|
Hi John, I am missing the emblem on one of my '71 trailers as well. Mine is from the driver's side area. A pair of emblems came up on eBay a few months back and went for over $300 dollars. I'll do without for now.
__________________
Kevin with Baity the Lab/Pointer //------AIR # 7303------\\ WBCCI 17109 visit my restoration blog at:
|
|
|
10-08-2007, 03:03 PM
|
#9
|
Rivet Master
Vintage Kin Owner
Vintage Kin Owner
Vintage Kin Owner
Currently Looking...
Greeeneville
, Tennessee
Join Date: Feb 2005
Posts: 1,301
|
Airstream was not "THAT" unique
Quote:
Originally Posted by HiHoAgRV
When you start looking for a replacement don't forget that the left emblem is different than the right
|
The "Land Yacht" emblem has a slight slope to the right in it's configuration. It is the same on both the left and right sides of the trailer. At least that's the case with my emblem.
However, the flag emblem does have the blue field forward and the red and white stripes to the rear. These are not interchangeable to the left and right.
__________________
Kevin with Baity the Lab/Pointer //------AIR # 7303------\\ WBCCI 17109 visit my restoration blog at:
|
|
|
10-08-2007, 06:04 PM
|
#10
|
Rivet Master
1991 34' Excella
1963 26' Overlander
1961 26' Overlander
Central
, Mississippi
Join Date: Nov 2006
Posts: 5,919
|
I was out playing all weekend so I missed your reply. The logos on my '77 unit have the top edge sloped to the front of the camper. On the curb side the logo therefore leans to the right, the street side has the logo leaning to the left. Yours could be different but I wanted to toss it out so you wouldn't make a bad assumption.
|
|
|
10-09-2007, 07:07 AM
|
#11
|
Rivet Master
Vintage Kin Owner
Vintage Kin Owner
Vintage Kin Owner
Currently Looking...
Greeeneville
, Tennessee
Join Date: Feb 2005
Posts: 1,301
|
Airstream must have used 2 right side emblems on my coach the day it was built. I'm not surprised.
__________________
Kevin with Baity the Lab/Pointer //------AIR # 7303------\\ WBCCI 17109 visit my restoration blog at:
|
|
|
10-09-2007, 08:36 AM
|
#12
|
Rivet Master
1991 34' Excella
1963 26' Overlander
1961 26' Overlander
Central
, Mississippi
Join Date: Nov 2006
Posts: 5,919
|
Quote:
Originally Posted by Silverhobby
Airstream must have used 2 right side emblems on my coach the day it was built. I'm not surprised.
|
Or maybe mine has a '77 and a '78
|
|
|
10-09-2007, 12:52 PM
|
#13
|
Rivet Master
Vintage Kin Owner
Vintage Kin Owner
Vintage Kin Owner
Currently Looking...
Greeeneville
, Tennessee
Join Date: Feb 2005
Posts: 1,301
|
Emblem Placement
Out in my yard, I have 2, 1967 International Overlanders, 1, 1968 Sovereign, 1 1971 Caravel Land Yacht, and 1 1972 Ambassador to look at. The emblems on the International models, the red, white, and blue ones, do have a left or right orientation.
Now, have I totally confused everyone?
__________________
Kevin with Baity the Lab/Pointer //------AIR # 7303------\\ WBCCI 17109 visit my restoration blog at:
|
|
|
10-09-2007, 07:06 PM
|
#14
|
Remember, Safety Third
1973 27' Overlander
Catfish Corners
, Georgia
Join Date: Oct 2004
Posts: 5,720
|
Yep.
Jim
|
|
|
10-09-2007, 08:36 PM
|
#15
|
Rivet Master
1983 34' Excella
1967 24' Tradewind
Little Rock
, Arkansas
Join Date: Nov 2006
Posts: 3,825
|
Quote:
Originally Posted by Silverhobby
Out in my yard, I have 2, 1967 International Overlanders, 1, 1968 Sovereign, 1 1971 Caravel Land Yacht, and 1 1972 Ambassador to look at. The emblems on the International models, the red, white, and blue ones, do have a left or right orientation.
Now, have I totally confused everyone?
|
Those and two Currently Looking’s in your profile? Call the crash cart STAT, terminal Aluminitus!
__________________
Vaughan
|
|
|
11-03-2023, 02:02 PM
|
#16
|
2 Rivet Member
1977 Argosy Minuet 6.0 Metre
1974 25' Tradewind
Portland
, Oregon
Join Date: Jan 2019
Posts: 29
|
After looking for one for a long time, I decided to make my own. If you need one let me know I am getting a batch made in the next couple of weeks.
They are milled out of aluminum. I made them based on photos and the measurements of the ghost imprint left on my trailer.
|
|
|
04-09-2024, 06:47 PM
|
#17
|
New Member
Hamilton
, Ontario
Join Date: Oct 2023
Posts: 1
|
Quote:
Originally Posted by Cliftonmc
After looking for one for a long time, I decided to make my own. If you need one let me know I am getting a batch made in the next couple of weeks.
They are milled out of aluminum. I made them based on photos and the measurements of the ghost imprint left on my trailer.
|
Hi i really need one of the land yacht badges. If i paid you in advance would you be able to make me one. I am in canada and will pay all postage.
Thanks George.
|
|
|
04-10-2024, 07:45 AM
|
#18
|
2 Rivet Member
1977 Argosy Minuet 6.0 Metre
1974 25' Tradewind
Portland
, Oregon
Join Date: Jan 2019
Posts: 29
|
Hi George! I just sold the last two I had. However I recently ordered a cnc that should allow me to make them myself (along with other things). My guess is it will be a couple of months for the machine to arrive, me get it set up, and dialed in to cut these. They should then be available again.
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|