air_boy

Hey! I wanted to get in touch with you directly to ask you a few more questions about your rear end separation fix, if that's alright. First, I was wondering if you'd be willing to send me some photos of what your fix looks like from the outside. Specifically, I'm trying to wrap my head around whether or not the shell is supposed to come directly in contact with the frame at the rear just above the bumper. Does that make sense? When I discovered the separation, the plywood floor was completely visible from the outside after I removed the blue aluminum band. So, basically it was frame-exposed/rotted subfloor, mangled c-channel, shell... But in the end, should it just look like frame-shell and then everything else is concealed behind the exterior skin? I don't know if any of this is making sense... When you mentioned jacking up the frame in the rear to bolt it to the frame, etc. was that to correct for the separation? Any photos or insight you have would be super helpful! Thank you!