|
07-24-2007, 10:15 PM
|
#1
|
Rivet Master
1963 22' Safari
2020 27' Globetrotter
State of
, Washington
Join Date: Jul 2007
Posts: 2,512
|
Engineered glue down
so I've read most threads about flooring. We see hardwood (and hardwood look alikes) in lots of trailers. We've been looking at the 5/16" glue down engineered flooring which is supposed to be very stable due to its plywood type construction, enough so for basement floors and unheated spaces. Of course a small expansion joint, but I would think it glued down would help stabalize the floor too, but wondering what experience people have had. Have a clean solid plywood floor at this point.
|
|
|
07-24-2007, 10:25 PM
|
#2
|
Rivet Master
1973 23' Safari
1977 23' Safari
2018 25' Flying Cloud
Palmer Lake
, Colorado
Join Date: Oct 2005
Posts: 4,092
|
In my humble opinion, bad idea. One of the joys of the Pergo and pergo-like floors is that they are easy to install, easy to remove, and tolerant of water (or so the ads say). I think it would be a big mistake to put down a flooring over the Airstream plywood that was semi-permanent. As vintage afficiando, I wonder how many times the floors in a 30-40-50 year young Airstream has gone from linoleum, to tiles, to carpet, to Pergo? And how many times has a rearrangement of cabinets demanded a new floor?
Make it easy. I don't care if the Pergo is a little loose and might even squeak a little because I put it in a little tight--what I want is current ease of maintenance (carpet, ugh) and the ease of mind that I can take it out and change the color, or orientation, or placement--without tearing the floor apart.
Wait till you have the water flood catastrophe and need to get the floor up just to dry it out...or the new significant other hates the color/orientation.
Zep
|
|
|
07-24-2007, 10:31 PM
|
#3
|
Site Team
2002 25' Safari
Dewey
, Arizona
Join Date: Mar 2005
Posts: 15,618
|
Another consideration is; what happens if you need to pull out the refrigerator. The new floor might be too high to get it out. I could pull my pergo out from that area if I had to.
__________________
Richard
Wally Byam Airstream Club 7513
|
|
|
07-24-2007, 11:36 PM
|
#4
|
Rivet Master
1956 22' Flying Cloud
Venice
, California
Join Date: Sep 2005
Posts: 672
|
goransons, what's the weight of the engineered versus pergo? it seems like the engineered is more of a hassle than what it's worth.
__________________
david
*by asking the above question,
i verify that i have already used
the search feature to the best of my ability...
|
|
|
07-25-2007, 09:31 PM
|
#5
|
Rivet Master
1963 22' Safari
2020 27' Globetrotter
State of
, Washington
Join Date: Jul 2007
Posts: 2,512
|
flooring
well the weight is actually less on the samples we looked at, being 5/16 of an inch thick, and a 25 year warranty. We have the entire kitchen out including the fridge,and both couches, so the bathtub and bathroom wall are our only things to cut around (toilet is out too). I've put lots of pergo in, and lots of glue down, I'm not so worried about the effort, but was worried about flex etc in the trailer.
|
|
|
07-27-2007, 11:45 AM
|
#6
|
Rivet Master
1958 26' Overlander
Mesa
, Arizona
Join Date: Jul 2004
Posts: 1,742
|
Wood floors should "float" so they can expand and contract. Gluing or screwing the flooring into the floor won't allow it to do this.
__________________
1958 Overlander
2011 Wolf Creek 850N TC
2011 Ford F-250 Crewcab (6.2L), 3.73RE
WBCCI #5661/AIR #5661/TAC # AZ-6
4CU 1st VP
My '58 Overlander Restoration and Travel Blog:
https://mellomikesairstreams.blogspot.com/
|
|
|
07-27-2007, 11:50 AM
|
#7
|
Rivet Master
Currently Looking...
West of Fort Worth
, Texas
Join Date: Aug 2006
Posts: 6,699
|
You hit on the main reason I wouldn't glue it down - Flex. Then there are the other reasons mentioned above.
Dave
|
|
|
07-27-2007, 01:43 PM
|
#8
|
Rivet Master
2001 34' Limited S/O
Moyock
, North Carolina
Join Date: Feb 2004
Posts: 1,010
|
I have pulled out carpet and put in the floating floor and think it actually weighs less than the carpet.
__________________
Keep the shiny side up.
WBCCI # 348
Past Region 3 President
Past President Tidewater Unit 111
Rick Bell in "Silverbell"
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|