Updating Tanks (hopefully)

[Bobolo]

I’m in the process of updating my 62 Globetrotter and am looking to upgrade my systems. One of the areas I’m looking to upgrade is the Gray (nonexistent), Black(Above sub-floor in rear), Holding(leaking 30 gallon tank in the front of the cabin.) tank. I need some help...
Can/How do I replace my old holding tanks under my sub-floor? where do I put them. I'm going to the welder in the next week or so, what do I need to know to successfully implement these systems. Attached are pictures of my frame please feel free too photoshop and repost to help visualize if needed.
I guess, I’m also calling out Andy. What do I need to buy from you to get these systems up and running, I’d love to give you my money...


thanks everyone for the help

[jcferguson]

There is a lot of information in the "A 63 for me" postings from Uwe...

I am doing a similar conversion/addition and am posting my progress on "1962 Safari"

I am following Uwe's model and added a spot in front of the (single) axle for a fresh water tank, this required moving some crossbraces, adding some reinforcements - I will get rid of the pressurized galvanized 30 Gallon tank and replace it with a plastic tank there - directly behind the axle will be a grey water tank, about 26 gallons, and a new black water tank back where it was originally.


Carlos