Window gasket release solution?

[interstateflyer]

We seem to always struggle to get our front and side windows to release. The glass likes to stick to the rubber gasket. We heard that there was a lube or release agent that could be applied to help with this. Does anyone happen to know what that might be?

[dznf0g]

Aerospace 303. I applied once in 2010 and they still open easily from the inside.

[polarlyse]

Ours were troublesome too. After getting them open I cleaned them and sprayed silicone on them. They open freely since then.

[Joe Palmieri]

I use Dupont Teflon silicone lubricant. It comes in a four ounce bottle. It is available at Lowe's. Just clean and dry the rubber gasket, put some of the silicone lube on a paper towel and wipe on the rubber all the way around the window. Haven't had any sticking problems since. Safe for rubber and no overspray.

[Jammer]

Tire talc is cheap and readily available and works great. It's what I used and I've only had to apply it once.

I've heard that the teflon products work too.

[BAB]

The teflon/sicilcone spray seems to stay in place very well. I use it on the rubber seals in my car as well.