Plug Shore Power into Locker Receptacle for Generator
Does anyone else have this setup?
From left to right, the Todd TS-30 Power switch, center, 30 amp Surge Guard, and on the right the 30 amp receptacle. You plug the shore power plug into this receptacle to get power from the generator.
From the owner's manual:
"Using the generator is very much like plugging into an external power source. Simply plug your power cord into the receptacle in the power cord storage compartment and the generator will provide operating current whenever it's running.
If you get in the habit of plugging the cord into this receptacle when storing, your generator will always be ready to use."
|All times are GMT -6. The time now is 02:28 PM.|
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.