Aircanuck wonders about aluminum

Aircanuck Aircanuck is offline

1 Rivet Member

Profile Comments

Showing Profile Comments 1 to 1 of 1
  1. Baby Zeppelin
    Hi, the three screws are under the bezel. The three tabs are just outside the screws. I chipped that area below one screw in removing the bezel, but if I were to reattach the bezel, which I'm not, I'd just put a few drops of RTV at the tab locations to glue it on.
    It took quite a bit of force to get the bezel off - couldn't do it w/o the pry tool and the plywood to spread the force under the tool. Got the bezel most of the way off on one side, slide an eight inch thick wood shim under it and pried from the other side. Then it all popped off. The bezel is made of chrome plated plastic - you can't bend it, but I suppose you can crack it. Mine came off fine. Good luck!
    With regard to leaks, there is just a quarter inch hole in the skin sealed with a grommet that the wires pass through. Doubt any water would get in there.
    Cheers,
    eriik

About Me

  • About Aircanuck
    City
    Courtenay
    State/Province
    British Columbia
    Country
    CANADA
    Gender
    male
    Trailer #1
    2013 28' Flying Cloud
    About My Tow Vehicle
    2018 Denali 3500 Duramax SRW

Statistics

Total Posts
Profile Comments
Blog
General Information
  • Last Activity: Yesterday 09:39 PM
  • Join Date: 01-24-2018
  • Referrals: 0
Disclaimer:

This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.



All times are GMT -6. The time now is 11:41 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.