Would u be willing to give some advice on this project i am working on. i was sent your way. any help would be appreciated greatly. thx. benjo
I would try to keep the components as close together as possible. You will need 1 or more battteries, a 120 volt breaker box, a converter, a fuse (12 volt) panel and a power cord. Locating the battery would be first and then get the rest as close as possible to keep the wires as simple as possible. There are many other things to consider. I would PM 68 Overlander who owns bestconverters.com and has been very helpful to members who are in need of help in this area. He could help you much better then I could.
Originally Posted by Benjo
i am going to fire away on some electrical questions. you seem to have a good sense on these matters. i am planning to rewire my 49 trailwind and i would like to get an idea of the components needed to complete this project. there are 4 outlets in the coach and we are satisfied with that. i know i will need a fuse box, converter/inverter, battery, etc. with this model there was no shore power hook up. where should that be placed. these might be dumb questions but it is part of my research to get the job done. any kind of diagram would be helpful. any helpful suggestions would be greatly appreciated. take care-ben
This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.