Dinette restoration pics request

[Ndcctrucks]

Hi All:

This last Sunday we bought our very first TT, a 2004 International CCD 22’.

The previous owners removed the dinette and built a bench (out of cheap pine).

We want to re-install the dinette using the disassembled benches and table. The table is missing all of the hardware, the rear bench is disassembled, and the electrical breaker panel with inverter are loose.

I do well in metalworking, so I expect to make most all the hardware.

I cannot, for the life of me, see how everything was mounted before.

ESPECIALLY where and how the electrical panel mounted.

Can someone PLEASE take a few detail pics of how the benches mount and where; the table clips for the wall, and etc??

Many thanks!

[Ndcctrucks]

I will send $20 via Venmo or PayPal for pics that are useful, as described above.

[Bubba L]

You may have to go to the Forum index and see if there’s anyone out there with the same model/year. If you find someone, PM them and see if they can send you pictures and dimensions. Good luck

[Ndcctrucks]

Thanks, I’ll try more searches

[AKNate]

If you search YouTube for International CCD 22 you can find some walkthrough videos. It looks like the power center was originally mounted into the end of one of the dinette benches. Airstream might also be willing to send you original drawings if you tell them what you’re after. They sent me all the electrical schematics for mine when I asked.

[BradS]

Hi. I have a 2006 22 foot CCD. My trailer is in storage elsewhere for the winter. I’ll look for some photos

[dbj216]

You might look for a service manual for your trailer. My 1975 service manual shows nice exploded views of every cabinet and labels all the parts. An Airstream dealer service guy might be able to help. Same with Airstream Inc.

David

[Ndcctrucks]

Thanks guys!

AKNate: I have requested the appropriate drawings from Airstream via their website. I included the year, model, length, and VIN. I’ll report how that goes. I did also watch a few vids but haven’t found one that shows the breaker panel.

BradS: Thank you sir!

dbj216: I have the manual and parts book. I will re-search through them to see if I missed them.

[AKNate]

Originally Posted by Ndcctrucks

... I did also watch a few vids but haven’t found one that shows the breaker panel.
...

This one showed it the best of the ones I saw. It’s not super clear and looks almost like a decorative part of the dinette bench, but I’m 90% sure that’s the breaker panel.

https://m.youtube.com/watch?v=lWnuMZ5Sgv8

[Ndcctrucks]

Aaahhhhh that makes sense!!

THANKS

[inthralled]

I have the same model that is all stock. Send me a private message and will take any pictures you need.
Buy the way I am cleaning mine up for sale. I just bought a 2008 25.

[Ndcctrucks]

Inthralled:

I tried to see you a PM but this site replies that you are not accepting or are not allowed to accept PM’s

If you want, you may email me at ndcctrucks@gmail.com

Thanks!

[Ndcctrucks]

Hi All:

After viewing the great walk-through vid and reassembling the dinette benches, it all makes sense how it goes together.

THANK YOU for your help!

Best,

-Ken