2014 Airstream Flying Cloud 25 - Colorado

[Mark Sherman]

One time twin bed trailer, converted nearly 4 years ago into a single twin bed with large computer workspace across from it, in place of the 2nd twin bed. Added flat storage under the twin bed. Still have all the components I removed. Traveled the country for 2 years looking for a new place to live. Has been parked for most of the last two years, outside the whole time I've had it. Put on new Michelin tires and wheels prior to hitting the road in Nov. of 2018. Trailer comes with tire pressure/temperature sensors and in cab consul. The front 29 inch TV stopped working into our last trip weeks ago, I'm ordering a new 27 inch TV to replace it. World doesn't make 29 inch TVs anymore. Never used the water heater or shower.

Comes with equalizer hitch, 50 amp cable, surge protector, leveling blocks, wheel chocks, OSB wheel protectors for when stored outside, also a telescoping ladder and floor jack, a few extra parts, like extra latches.



View this ad at Airstream Classifieds - 2014 Airstream Flying Cloud 25 - Colorado

[Genebuilder]

Tell me how you fabricated/purchased the fold down rail and the street side curved rail along side the twin mattress. Very impressive and creative.

[Mark Sherman]

The curved back corner of the bed was done with 4 separate 1/8th inch plywood, butting up against the thicker plywood used in the rest of the surrounding bed/mattress walls. I used a piano hinge for the bed's front flap, when it's up, using a stretchable cord to hold it up, all the electronics from the desk sit on the bed during travel down the road. The metal along the back of the desk counter top was simple aluminum stock cut for the curve at each end, then screwed into the cabinet plywood.

[Genebuilder]

Is the twin bed factory height? Did you mod the storage below?