Aqua Marine Deck

[trailerpup]

I saw a post about Aqua Marine Deck being applied to the rear bumper cover and battery box. I contacted them by email and expressed my interest.

A post on this forum said that they had the measurement specs on file. I requested the "narrow" bumper cover decking.

I have received an email requesting the sizing for the rear bumper cover.

Has anyone had experience with ordering these? If so, can you tell me what measurements to give them. I am not sure if I should measure to the actual edges of the cover itself. It look like the decking would have to be shorter than the actual measurement due to the rivets near the hinge of the cover?

I have a 19 FC.

Any info provided is greatly appreciated.

Help me@GMFL, you may be my only hope!

[link2dks]

I did not have to give Aqua Marine measurements, not sure why they are asking you for them. As far as width goes I have about 1/4 inch of exposed lid on either end of the cover.

It did cover some rivets, it was not an issue, no bumps. I also got the battery box cover from them. Both for $185.

Take a look at post#6494 on 5/22/2020 in the "What did you get for your trailer today" thread posted by GMFL. He says he gave Thomas at Aqua Marine measurements for both narrow and wide body Airstreams.

Dave S