Wheel Well Trim

[cspezy]

Newbie here and willing to get my hands dirty!

Had a blowout that did damage to the wheel well trim and a little to the underbelly. Pics attached.

Is it as easy as taking the old piece off and replacing with a new one?

Should I replace the underbelly or is there a tape that can be a fix for that (as it is not visible)?

Thanks in advance for all of your help!!!

[CBWELL]

The underbelly can be repaired by getting some sheet aluminum, cutting to fit over the rip, extending a couple of inches beyond the rip, using some Sikaflex or equal to seal tha patch, and riveting a patch on. A new wheel well trip can be purchased and replace to old damaged one. Not a hard fix!!