Bearing part number 2016 25ft International

[nyx]

I am in Porte aux Basques Newfoundland and there are no RV trailer dealers withIn 100 miles. I need to get a bearing changed out. Does anyone know the part numbers for the bearings. Any suggestions on where else I can get the job done other than a dealer? Any help would be much appreciated.

[richard5933]

Doesn't have to be an RV dealer to get this done. Any place that works on trailers of similar size should be able to help do a bearing service. Around here there are lots of places which sell & service utility trailers, and I'd suggest you seek out similar places near you.

On a 2016 trailer are you sure you need new bearings and not just a good service (clean & regrease?) If a service is all you need, then you just need to get the new seals.

If you can still see the tag on your axle under the trailer, get the numbers from it. The folks at Dexter can verify the exact bearings & seals you'll need for your axle from those numbers.

https://www.dexteraxle.com/Contact/

[GCinSC2]

Can you please review your owners manual and look for a description of the (assumed) wheel bearing. Does your trailer have traditional greaseable bearings or does it use Nev-R-Lube bearings? Big difference, not interchangeable and the Nev-R-Lube requires more shop service type replacement procedures as opposed to the older greaseable units.

Gary

[rich e]

Airstream customer service in Ohio provided great info to me by email.
Numbers for bearings,races,seals

[hairyclive]

Originally Posted by nyx

I am in Porte aux Basques Newfoundland and there are no RV trailer dealers withIn 100 miles. I need to get a bearing changed out. Does anyone know the part numbers for the bearings. Any suggestions on where else I can get the job done other than a dealer? Any help would be much appreciated.

Industrial hardware supply and wholesale auto parts places will often have bearing catalogs with cross ref from various manuf. to provide suitable replacements.

[Action]

There is a CARQUEST AUTO PARTS in that location.
Removing the bearing and taking it in may get you a replacement if it is standard bearing.
Plus the part number may be stamped on it as well.


Action