Axle nut size question

[speedyz4]

Hi
Does anybody know the axle nut size on the axle
2011 flying cloud

[GCinSC2]

Take a look at this reference from etrailer https://www.etrailer.com/Accessories...ine/6-183.html

Looks like size is 1" X 14 threads.

OOPS now I think you're looking for the socket size, right? Try 1 7/16"

[fireleu6169]

What was the answer? Mine is stamped 42 mm, does the drum come off once the nut is removed?

[tjdonahoe]

Originally Posted by fireleu6169

What was the answer? Mine is stamped 42 mm, does the drum come off once the nut is removed?

Look for the snap ring….sealed bearings

[GCinSC2]

42mm is the size of the bearing bore.

Remove the dust cap, small snap ring, use 1 /7/16" by 1/2" drive, no extension, 1/2" breaker bar, possibly a cheater pipe and keep the socket tight up to the washer so it doesn't slip off.

Yes after the nut is removed the drum can slide off.

Gary

[fireleu6169]

Thanks Gary, you are a Rock star

[GCinSC2]

Originally Posted by fireleu6169

Thanks Gary, you are a Rock star

Hope all works for you. I'm just a DIY'er that enjoys mechanical and electrical stuff.

Good luck

[speedyz4]

Thank you all for your help
Have a great day