|
07-13-2020, 07:00 PM
|
#1
|
2 Rivet Member
1975 31' Sovereign
los angeles
, California
Join Date: Aug 2014
Posts: 23
|
Any leads for a Dust Cap for '75 aluminumum 15" 6 lug?
i know people have mentioned they have them sitting around after switching axles/etc...i have been looking for over a year for this dust cap! seems no one else used a 4" diameter, I keep ordering 4" replacements and receiving 4.25 or 4.5...anyone got one of these? Or a lead on finding one? TIA
https://imgur.com/LisHEwz
https://imgur.com/s8ZIDj9
|
|
|
07-13-2020, 09:06 PM
|
#2
|
3 Rivet Member
2007 25' International CCD FB
South
, South Dakota
Join Date: Sep 2007
Posts: 155
|
You need to measure the opening on the rim . You are correct on 4 inches but I believe your opening is smaller. Send photos of rim. You might try. http://www.prestigewheel.com/ImageP2675.asp
__________________
Richard (Dean) Tighe
W.B.C.C.I. 5617
2007 25' FB International CCD Solar
2019 Toyota Tundra
|
|
|
07-13-2020, 10:10 PM
|
#3
|
Rivet Master
2007 27' Safari FB SE
NW Oregon in a nice spot
, Oregon
Join Date: Sep 2011
Posts: 879
|
I have a guy here locally in Cornelius that has tons of stuff and can find stuff for unusual sizes. He is not factory trained, but a journeyman welder retired who bought an custom metal machine shop (he has some amazing presses and metal saws) who likes to work on stuff. When I needed an unusual size that no new dealers had he found one in a drawer by the back trailer office.... That kind of place.
Actually he has the big machinery and makes some amazing one off trailers for farm use, etc. PM me and I will get you his info to see what he has in his drawers in the back room...or contact me directly via pm and I will go visit him and see if we can find what you need.
Its always interesting visiting him and just takes a bit of time to sit on the stool and talk. But he does have the special "bits" we all need.
|
|
|
07-20-2020, 04:14 PM
|
#4
|
1 Rivet Member
1978 31' Excella 500
Fort Walton Beach
, Florida
Join Date: Sep 2018
Posts: 16
|
Quote:
Originally Posted by JOES75AIRSTR
i know people have mentioned they have them sitting around after switching axles/etc...i have been looking for over a year for this dust cap! seems no one else used a 4" diameter, I keep ordering 4" replacements and receiving 4.25 or 4.5...anyone got one of these? Or a lead on finding one? TIA
https://imgur.com/LisHEwz
https://imgur.com/s8ZIDj9
|
I have 4 -removed wheels from my 78 excella
|
|
|
07-20-2020, 04:38 PM
|
#5
|
Rivet Master
1971 31' Sovereign
1972 31' Sovereign
1983 31' Airstream310
Soddy Daisy
, Tennessee
Join Date: Sep 2013
Posts: 687
|
Could you post pics of your caps, I am looking for some also would like to see what I am looking for.
|
|
|
07-20-2020, 05:02 PM
|
#6
|
Rivet Master
1966 22' Safari
1955 22' Flying Cloud
Fredericksburg
, Texas
Join Date: May 2015
Posts: 2,955
|
Don’t know if you’ve tried Out Of Doors Mart, but they do have the dust covers. I just checked online there. They state they are 4” diameter. I mentioned that to a friend of mine recently and he purchased several for his 1990 Excella. They fit perfectly. Check it out and let us know what you think. They are listed in the “Parts” section under the “wheels, drums, brakes, rims etc” or something like that. Good luck
|
|
|
07-20-2020, 10:41 PM
|
#7
|
1 Rivet Member
1978 31' Excella 500
Fort Walton Beach
, Florida
Join Date: Sep 2018
Posts: 16
|
These are the wheels that I am replacing.
|
|
|
07-20-2020, 10:42 PM
|
#8
|
1 Rivet Member
1978 31' Excella 500
Fort Walton Beach
, Florida
Join Date: Sep 2018
Posts: 16
|
Quote:
Originally Posted by shinyshanty
|
|
|
|
07-21-2020, 03:25 AM
|
#9
|
2 Rivet Member
1975 31' Sovereign
los angeles
, California
Join Date: Aug 2014
Posts: 23
|
I think tone of those would work for my rim if I could buy it off you! I tried the stainless...too big! Thanks Shiny!!!
|
|
|
07-21-2020, 10:44 PM
|
#10
|
1 Rivet Member
1978 31' Excella 500
Fort Walton Beach
, Florida
Join Date: Sep 2018
Posts: 16
|
Send me a shipping address and I will send you them- no charge for a fellow Air Streamer-
|
|
|
07-23-2020, 11:25 AM
|
#11
|
2 Rivet Member
1975 31' Sovereign
los angeles
, California
Join Date: Aug 2014
Posts: 23
|
that's waaay too kind, let me pay for shipping and handling! i don't have an address here because I'm in the trailer out in the desert...but I go to a friend's place in Palm Springs to pick up mail every couple of weeks:
Joseph Mullins
2250 S Palm Canyon #35
Palm Springs CA 92264
i can't thank you enough, honestly. I have been looking for years for this piece.
|
|
|
07-28-2020, 05:42 PM
|
#12
|
1 Rivet Member
1978 31' Excella 500
Fort Walton Beach
, Florida
Join Date: Sep 2018
Posts: 16
|
I mailed you three caps- one of them was busted up pretty bad. They left Florida today to the address you provided.
|
|
|
07-28-2020, 10:38 PM
|
#13
|
2 Rivet Member
1975 31' Sovereign
los angeles
, California
Join Date: Aug 2014
Posts: 23
|
Honestly, I cannot thank you enough! I called 30 businesses and yards for this. What an unexpected act of kindness.
|
|
|
08-12-2020, 04:58 PM
|
#14
|
2 Rivet Member
1975 31' Sovereign
los angeles
, California
Join Date: Aug 2014
Posts: 23
|
Thanks shiny
thank you so much-those caps showed up last night and fit PERFECTLY. After ordering and trying a dozen bizarre mismatched caps, it's so nice to have the real thing! still can't get over how kind it was for you to ship those to me, thank you so very much, sir!
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|