|
|
02-28-2020, 12:54 AM
|
#1
|
2 Rivet Member
2019 25' Flying Cloud
Walnut Creek
, California
Join Date: Jul 2018
Posts: 81
|
Tonneau Cover for RAM2500 w/ RamBox
Does anyone have suggestions for a Tonneau Cover for RAM2500 w/ 6'4" Bed w/ RamBox? I remember reading some comments in a thread, but can't find it anymore. I am thinking of getting a retractable one and would appreciate your feedback if you have experience with retractable cover.
__________________
2019 25FB Flying Cloud
2021 Range Rover HSE
2019 RAM 2500 Hemi
2012 Mercedes GL450
|
|
|
02-28-2020, 04:56 AM
|
#3
|
Riveted
2018 33' Classic
Charleston
, West Virginia
Join Date: Mar 2018
Posts: 264
|
I have the tri-fold that came from RAM. I also have RAM Box and 6 foot bed. I like it but at times it can be hard to snap the clamps back in place after opening depending on the cargo in the bed. The cargo blocks the clamps handle making it hard to clamp. Also you can fold back the first two sections and run with them open for higher items like bikes but you still have about a foot and a half of cover when in the folded position up near the cab that remains limited by bed height due to the folded cover. That being said, the cover can be removed completely by one person if needed. You can also get a hard camper top and install the lift kit for the topper which will raise the entire camper top and be able to still access the RAM Box.
|
|
|
02-28-2020, 05:15 AM
|
#4
|
Rivet Master
2019 27' Globetrotter
McHenry
, Illinois
Join Date: Apr 2018
Posts: 2,153
|
Like the BAKFlip MX4 Hard folding top
AShar, great question!
I searched different options vs. cost and settled on the BAKFlip MX4 hard folding top. They offer a version for your truck with the RAM Boxes: https://bakflip.com/p/bakflip-mx4-to...uck-2500/2019/
It’s secure, easy to use and makes the bed accessible but dry.
NOTE: I ordered mine from Amazon because I had gift cards from a work anniversary. It was too narrow (wrong listing) but Amazon arranged for UPS to pick it up from my house. I ended up ordering direct from BAKFlip and that one fit.
Good luck!
Jeff
__________________
2019 27’ Globetrotter FBT Walnut/Dublin Slate
2018 FC23FB
2019 Ram 2500 6.4 Hemi Laramie Blue Ox 1000#
WBCCI# 10258
RETIRED!
|
|
|
02-28-2020, 10:32 AM
|
#5
|
Rivet Master
2016 27' Flying Cloud
Olympia
, Washington
Join Date: Nov 2015
Posts: 618
|
Here is the tonneau I have for my 2018 Ram 3500 w/RamBoxes --- works great. I recommend it.
https://truxedo.com/lopro/2018/ram/3500
__________________
Richard Wills, Olympia, WA --- WBCCI 8873, WL7Z
"Aurum": 2018 Ram/Cummins 3500
"Argentum": 2016 AS FC 27 FB
RIP "BigDog": M Harlequin Great Dane, 150 lb
"St. Rocco": M Black Great Dane, 150 lb
|
|
|
02-28-2020, 10:36 AM
|
#6
|
1 Rivet Member
2020 27' Globetrotter
Knoxville
, Tennessee
Join Date: Jun 2017
Posts: 11
|
Hey Jeff,
I second the rec on the Bakflip mx4. I have one on my 1500 w/RB and will be ordering one for my 2500 w/RB when it arrives. Gives you peace of mind for sure.
I did pick up the new GT last Friday. It is gorgeous! TV has been sitting at factory in Mexico for at least 3 weeks. 1500 pulled fine for the trip home but as we’ve discussed, not the best long-term solution.
Best regards
|
|
|
02-28-2020, 10:57 AM
|
#7
|
Rivet Master
2017 16' Sport
N/A
, N/A
Join Date: Nov 2017
Posts: 1,789
|
Tonneau Cover for RAM2500 w/ RamBox
I have Exceed on my Ram 1500, just installed several days ago, nice fit looks good w. A lock mechanism that can’t be jimmied easily. Tested through car wash and got about a cup of water in bed in the corner by windscreen. I like that it’s a hard cover with no seams to leak since it has a cover over them.
|
|
|
02-28-2020, 11:36 AM
|
#8
|
2 Rivet Member
2015 27' FB International
Miami
, Florida
Join Date: Oct 2018
Posts: 66
|
Bakflip. I bought my 2017 Ram 2500 used and it came with it. The only issue I have with it is that it's not watertight but that may be because it needs adjusting. Or maybe that's just the way it is. But it's secure and it works great.
|
|
|
02-28-2020, 12:41 PM
|
#9
|
Rivet Master
2021 25' Globetrotter
Jamestown
, Rhode Island
Join Date: Mar 2012
Posts: 1,720
|
We had a Bakflip on our Ram with Rambox. Great cover!
__________________
Loving our 2021 Globetrotter 25 and our 2022 Ford F-150 King Ranch 5.0!!! Plenty of payload, not even close to axel limits and it drives and rows beautifully…
|
|
|
02-28-2020, 12:42 PM
|
#10
|
2 Rivet Member
2007 25' International CCD
Prescott
, Arizona
Join Date: Feb 2019
Posts: 91
|
I have a retractable cover and love it. I have a Nissan Titan and I bought an after market cover that fits a number of different brand of trucks.
My experience is mainly positive. The cover is waterproof even at the carwash. It is easy to put a roof rack over the cover and store different items. I use a Yakima system to store my bikes and expect to have a kayak mount soon.
The negatives are minor. The cover didn't fit over the Titan boxes. The box where the cover retracts, takes a foot or so of bed space. The box doesn't go to the floor though so I can use the full length of the bed for long items and I when out with the Airstream, I can store seldom used items underneath.
I highly recommend the cover.
Mike
|
|
|
02-28-2020, 01:21 PM
|
#11
|
Firedog1
2018 30' Classic
Woodbridge Connecticut &
, Venice Florida
Join Date: Mar 2013
Posts: 243
|
Quote:
Originally Posted by new2trailer
I have a retractable cover and love it. I have a Nissan Titan and I bought an after market cover that fits a number of different brand of trucks.
My experience is mainly positive. The cover is waterproof even at the carwash. It is easy to put a roof rack over the cover and store different items. I use a Yakima system to store my bikes and expect to have a kayak mount soon.
The negatives are minor. The cover didn't fit over the Titan boxes. The box where the cover retracts, takes a foot or so of bed space. The box doesn't go to the floor though so I can use the full length of the bed for long items and I when out with the Airstream, I can store seldom used items underneath.
I highly recommend the cover.
Mike
|
Take a look at the “Pick up Pack” sold by Highway Products. I just ordered one for my new GMC 3500
__________________
Russ and Lisa
2018 Classic 30
2020 GMC Sierra 3500HD Denali Diesel 4x4
Sold but not forgotten: 2005 Classic 25 Limited
2015 Classic 30 RB
|
|
|
02-28-2020, 03:34 PM
|
#12
|
3 Rivet Member
Fair Oaks Ranch
, Texas
Join Date: Jul 2015
Posts: 150
|
Quote:
Originally Posted by nikonman13
Hey Jeff,
I second the rec on the Bakflip mx4. I have one on my 1500 w/RB and will be ordering one for my 2500 w/RB when it arrives. Gives you peace of mind for sure.
I did pick up the new GT last Friday. It is gorgeous! TV has been sitting at factory in Mexico for at least 3 weeks. 1500 pulled fine for the trip home but as we’ve discussed, not the best long-term solution.
Best regards
|
Another vote for the Bakflip MX4. I have a 1500 with Ramboxes. This is my second Bakflip and like it a lot.
__________________
2016 Oliver Legacy Elite II #135
2020 Ram 2500 Laramie 6.7
|
|
|
02-28-2020, 03:49 PM
|
#13
|
1 Rivet Member
2016 25' Flying Cloud
Valrico
, Florida
Join Date: May 2019
Posts: 16
|
Check out Diamondback bed covers. Put one on our 2017 1500 with ram box, worked well. Traded in the ‘17 and got ‘19 without rambox, wanted 6’2” bed. Works well on this Ram also. Only drawback is that they are pricey, but they are well made and extremely secure.
|
|
|
02-28-2020, 11:00 PM
|
#14
|
1 Rivet Member
1970 21' Globetrotter
Napa
, California
Join Date: May 2018
Posts: 6
|
Retrac
While searching for my retractable for my 2019 1500 I noticed that RETRAC has them for RAM BOX set ups.
Unlike BACK FLIP it disappears completely into the 7" roll up box. Theres still plenty of room under the box for full bed length usage, but the drain tubes kind of get in the way. Other wise it works & looks great. Kind of pricey at $1200 on line but operates very easy & looks great.
|
|
|
02-29-2020, 04:32 AM
|
#15
|
2 Rivet Member
2019 25' Flying Cloud
Walnut Creek
, California
Join Date: Jul 2018
Posts: 81
|
Quote:
Originally Posted by stevefoltz
While searching for my retractable for my 2019 1500 I noticed that RETRAC has them for RAM BOX set ups.
Unlike BACK FLIP it disappears completely into the 7" roll up box. Theres still plenty of room under the box for full bed length usage, but the drain tubes kind of get in the way. Other wise it works & looks great. Kind of pricey at $1200 on line but operates very easy & looks great.
|
Thanks, I checked out their website and loved it. I think Sean and Kristy of LoLoHo have the same on their truck. Unfortunately, they don't seem to have one available yet for 2019 RAM 2500 w/ new body style.
__________________
2019 25FB Flying Cloud
2021 Range Rover HSE
2019 RAM 2500 Hemi
2012 Mercedes GL450
|
|
|
02-29-2020, 05:35 AM
|
#16
|
1 Rivet Member
2020 27' Globetrotter
Knoxville
, Tennessee
Join Date: Jun 2017
Posts: 11
|
This is from the bakflip site. Might be worth a phone call.
FITS YOUR
2020 Ram Truck 2500
6'4" Bed
PRODUCT INFORMATION
LIST PRICE:
$1,144.31
OUR PRICE:
$1,029.88
Made in the USA
FREE SHIPPING
Best Price Guaranteed
855-962-2250
RATING:
1249
PART #:
BAK-448203RB
QTY:
ADD TO CART
As low as $86/mo with Affirm. Prequalify now
|
|
|
02-29-2020, 11:12 AM
|
#17
|
3 Rivet Member
2019 25' Flying Cloud
North-Central
, Florida
Join Date: Jan 2019
Posts: 115
|
Tonneau Cover sources
BAKFlip MX4 works like a charm, easy to install, secure, tailgate closes without lifting cover, etc., etc.
Best price I found (about a month ago) was here:
http://tonneaucovered.com/
|
|
|
02-29-2020, 02:02 PM
|
#18
|
Site Team
2009 25' FB International
2018 27' Globetrotter
Tavares
, Florida
Join Date: Mar 2014
Posts: 3,654
|
I have a BAK Roll-X cover for my 2019 RAM 2500 with the Ram Boxes. ( )
I had the BAK-Flip on my 1500 with Ram Boxes and decided to go with the roll up design with this truck. I like it a bit better than the flip up design as it doesn't require you to lift anything.
FWIW!
|
|
|
03-02-2020, 10:25 PM
|
#19
|
2 Rivet Member
2015 27' FB International
Findlay
, OH
Join Date: May 2013
Posts: 46
|
We have a Ram 2500 diesel (extended cab) with a retractable cover by Pace Edwards. When ordering our cover, we were careful to chose top rails with a GROOVE for mounting our Thule rack for bikes. New to kayaking last summer, ♥️ I began formulating a way to mount a kayak as well. When the cover is closed, I believe the bed storage height is 17 inches. The Pace Edwards box utilizes about six inches of the length of our bed. We love our system but it must be a bit of a unicorn because about once a week while on the road, folks stop us to gather info and snap photos. Good luck as you make your decision. There is so much helpful information here on the Air Forums.
~Allyson
|
|
|
03-04-2020, 06:55 AM
|
#20
|
2 Rivet Member
2015 27' FB International
Miami
, Florida
Join Date: Oct 2018
Posts: 66
|
Quote:
Originally Posted by pianolaw
Bakflip. I bought my 2017 Ram 2500 used and it came with it. The only issue I have with it is that it's not watertight but that may be because it needs adjusting. Or maybe that's just the way it is. But it's secure and it works great.
|
UPDATE: I have the Bakflip G2. As I stated it came with the truck and had some leaks. I contacted BAK Customer Care and after sending them some pictures it was determined that the cover was too close to the cab so by loosening the elevator bolts and sliding the cover towards the tailgate I was able to adjust the cover for a better fit. Works great now. Best customer care experience I have had in a long time so something to keep in mind when trying to decide on a cover.
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|