Quote:
Originally Posted by knunut
Was it cut freehand or Router or combo of thing's ,looks nice.
|
I used a sabre saw. Mocked up first with Sharpie, coffee percolator was the determining factor for sizing. Drilled holes where the curved section meets the straight section and started the curved cut from one of them. Used the rip fence attachment to follow around the outside edge to cut the curved portion. Clamped a yardstick as a guide for the straight section. Unfortunately, the blade started walking, hence the slightly bowed straight cut.
A router would most likely be the better tool to use but I don't have one.
Greg