Visit our Popular Forums

Ron Glow · 08-14-2022, 08:19 PM

Quote:

Originally Posted by MANUEL LABOR

Does Airstream no longer supply these windows?

I could not find them on Airstream Supply website. I suppose they may be available from the factory as a replacement part. My search always led me to High Sky RV Parts, but they often are out of stock or very expensive. Regardless, I have only seen ones with a plastic trim piece on inside of door. Mine is all aluminum.

It sounds like I definitely have many who are interested and need to get to work making some.

Ron

Roadmaster39 · 08-15-2022, 07:23 AM

Put me down for one.

Erik

ronalddodge · 08-15-2022, 12:55 PM

I am interested as well! Very nicely done.

Ron

Skyhook · 09-20-2022, 09:52 AM

I have a "new" door from our 2019 Flying Cloud FB that was removed when new because my wife wished to have a curtain instead of the cool door. See my add in the Classifieds.

https://www.airstreamclassifieds.com...florida-366080

Thanks

TeddyK · 09-20-2022, 11:55 AM

I’ll buy one

zuberobert · 09-22-2022, 07:54 AM

Great work, did mine a few weekends ago. It brings in much more light into the kitchen. I did not drill through but used #6 1/2" round head screws.

zuberobert · 09-22-2022, 08:03 AM

That looks great, I did mine a few weekends ago. I decided to not drill straight through. I used #6 3/4" SS round head screws.

Alovlien · 02-02-2023, 12:45 PM

Ron, any progress toward a kit?

Ron Glow · 02-02-2023, 06:06 PM

Quote:

Originally Posted by Alovlien

Ron, any progress toward a kit?

I haven’t forgotten. Recovering from the holidays. I still search and find nothing else available. I will respond to those who have shown interest when it’s ready.
Thank you for checking in.
Ron

baggs · 02-10-2023, 11:14 PM

u post to australia!?

Ron Glow · 02-12-2023, 04:38 AM

Quote:

Originally Posted by baggs

u post to australia!?

If you mean “ship to Australia”, I don’t see why not. I will have to check the cost. Interest has been very good on this forum and I plan on letting all interested people know when I am ready.
Thanks for your interest.
Ron

baggs · 02-12-2023, 04:44 AM

gold!

kittmaster · 02-12-2023, 06:12 AM

Edited: NM. LOL.

plndrm · 03-01-2023, 03:45 PM

Hi Ron,
Looks great, add me to the list of those interested.

Marc

Ron Glow · 03-01-2023, 05:02 PM

Thank you Marc.

plndrm · 03-01-2023, 08:29 PM

Hi Ron,
That window looks great. Usually I find these posts a decade after they are posted. Not this time! Add me to the interested in one list please.

Marc

baggs · 03-01-2023, 09:40 PM

i mqy havr to sell a kidney to pay for frieght to south australia hahahahah

cobra03svt · 04-02-2023, 11:02 PM

How can I buy one of your kits? What did you use to cut the hole in the bathroom door.

Thank you,
Terry

Ron Glow · 04-04-2023, 05:22 AM

Quote:

Originally Posted by cobra03svt

How can I buy one of your kits? What did you use to cut the hole in the bathroom door.

Thank you,
Terry

I am close to having kits ready to ship. My plan is to send a personal message to everyone who wants one. I am going to offer the kit with the buyer’s choice of aluminum binder post or stainless steel screws. The binder posts look better to me, but 1/4” holes must be drilled through the door, adding a bit more difficulty. The screws would only need a tiny pilot hole to get started. I used a jig saw to cut the hole in the door.
Thank you,
Ron

baggs · 04-27-2023, 05:26 AM

Quote:

Originally Posted by Ron Glow

I am close to having kits ready to ship. My plan is to send a personal message to everyone who wants one. I am going to offer the kit with the buyer’s choice of aluminum binder post or stainless steel screws. The binder posts look better to me, but 1/4” holes must be drilled through the door, adding a bit more difficulty. The screws would only need a tiny pilot hole to get started. I used a jig saw to cut the hole in the door.

Thank you,

Ron

brilliant ron