dish net hookup

[dmiskanin]

We have a 2020 flying cloud. Need info on how to hook up a wally
receiver to the sony multimedia player. thx

[DoubleR]

Use thr SAT connector on the outside on the driver’s side. The other end of that cable terminates behind the DVD. You will need to loosen the wooden box and dig around for the other end of the SAT cable. It will be labeled SAT. You will need to purchase a multi to one HDMI if you want to use both the DVD and Wally. Good luck.

[Tater]

What DoubleR said. In our 2019, I purchased a 4x2 HDMI splitter and attached with Command tape. My dealer had pulled the sat cable up from the back of the DVD area but it was on the short side so I added a 6" extension to that. I mounted the Wally in the same area with Command tape. On my 4x2 HDMI, we had Blu Ray on first input and Wally on the second. Just had to remember to put it on the #2 input for Wally to work. TV was on HDMI 1 input so that didn't need to be changed. I did have to add an adapter to get more outlets in the DVD area since there are only two from the factory. My HDMI had a small transformer that had to be plugged in so needed at least three outlets. The picture was great on the TV using the Wally. Good luck and enjoy.