1979 International TV antenna wall plug

[wacnstac]

Hi,

I busted the plug that plugs into the antenna jack which is connected to the built in antenna on my rig. It is white plastic about 1/2" in width and has two pieces which screw together.

Is this a standard plug of any kind that I can go out and buy new?

[Sparty73]

Is the jack actually two small holes in the plate? If so, it sounds like the very old style 300 ohm connector that is in my 1977 Argosy. I tried to find a new plug and had no luck. I ended up buying a 75 ohm pass through connector, drilling a new hole in the plate to insert the pass-through and then I connected the antenna wire to a 300 ohm to 75 ohm convertered and plugged into the inside side of the pass through. You can then plug a normal 75 ohm TV cable to the outside of the pass-through. It seems to work.

[azflycaster]

I bought a replacement plug from Out-of-Doors Mart recently.
Brown 2 PIN Plug 13174 [13174] - $3.95 : ODMRV , Out-of-Doors Mart