2013 25' Flying Cloud
2008 30' Classic
On The Road To Wherever We End Up
, Traveling the USA
Join Date: Nov 2013
Posts: 552
Outside "Moonlight"
Anyone have a tip on how to remove the metal ring around the exterior moonlight? While I'm at it, how about how to easily remove the plastic lens cap on the exterior tear drop running lights?
Thanks, John
__________________
Jeanne and John, and always with us...Jake
2008 30' Classic Ltd Rear twin, 2014 Ford Super Duty
WBCCI 3100, unit 12, TAC USA-1, Escapees 129379
On ours I just removed the screws and and worked a 2' length of fine stainless wire under the flange to cut the sealant, pried carefully and lifted out.
2013 25' Flying Cloud
2008 30' Classic
On The Road To Wherever We End Up
, Traveling the USA
Join Date: Nov 2013
Posts: 552
Thanks. There are no screws on the metal ring. Nor are there any screws in the lens. The metal ring does not screw on or off as best I can determine, but it does rotate.
__________________
Jeanne and John, and always with us...Jake
2008 30' Classic Ltd Rear twin, 2014 Ford Super Duty
WBCCI 3100, unit 12, TAC USA-1, Escapees 129379
Do you know what a learning experience is? A learning experience is one of those things that says "You know that thing that you just did? Don't do that."
2013 25' Flying Cloud
2008 30' Classic
On The Road To Wherever We End Up
, Traveling the USA
Join Date: Nov 2013
Posts: 552
Yes, that is it. It moves slightly left and right, but does not screw. I'm about ready to take a small screw driver and see if I can pop it off, or at least create enough space to slip a rag and work the ring off.
__________________
Jeanne and John, and always with us...Jake
2008 30' Classic Ltd Rear twin, 2014 Ford Super Duty
WBCCI 3100, unit 12, TAC USA-1, Escapees 129379
This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.