Well, I've got all my doors and windows resealed now and am starting on my water and gas lines. I want to change the faucets on the lavatory and shower but I don't know how to get to the back of the shower faucet. If you know how I can do this without disassembling the whole bathroom let me know. Tom
On my Argosy, I had to remove the rivets holding the moldings at the tub faucet, then pull the panel away from the wall enough to get at the rear of the faucet. I replaced the tub faucet, and installed all new pex, with flex lines going to all faucets. The pic shows the old faucet, and moldings I had to remove to get behind the panel. Hope this helps.
On my Argosy, I had to remove the rivets holding the moldings at the tub faucet, then pull the panel away from the wall enough to get at the rear of the faucet. I replaced the tub faucet, and installed all new pex, with flex lines going to all faucets. The pic shows the old faucet, and moldings I had to remove to get behind the panel. Hope this helps.
I tried it your way today and it worked great. Thank you......Tom
This website is not affiliated with or endorsed by the Airstream, Inc. or any of its affiliates. Airstream is a registered trademark of Airstream Inc. All rights reserved. Airstream trademark used under license to Social Knowledge LLC.