I have heard reports of Zip Dee awnings opening while the Airstream is in transit. I am installing the new Zip Dee key pad with an on/off switch.
There are four new wires that the new keypad requires be dealt with (see attached diagram). The four wires are:
1. a black wire that connects to the top port of the keypad and to the
12V powersource;
2. a red wire that connects to the middle port of the keypad and to the Zip Dee control board (see attached photo);
3. a second red wire that connects to the bottom port of the keypad and to the control board; and
4. a second black wire that connects to the
12V power source and the control panel
My questions are several:
a) where is the
12V power source? Is it accessed via the Zip Dee control pad? If yes, where on the control panel can it be accessed?
b) regarding wires #2 and #4, exactly where on the control pad do these two wires connect into?
Thanks for any assistance you can provide.