Fuse Panel Confusion

[Profcbutler]

I recently purchased a 2016 23FB. In a "senior moment" I removed one of the 30 Amp fuses so I could match it up at an Auto Zone for the same style. Well, when I came back to the fuse box I sort of remembered where it went. The problem is there are three 30A fuse locations on this box and I am questioning which spot it went in. To add insult to injury I began playing three card monte with the slots. I must admit I am a bit confused at this point. I have a attached a picture which is my current configuration (two together to the left). It is not clear on the panel since one is a spare. Can someone help me with this? Thanks Chris

[jcslocum]

I’m not seeing a picture. But what is t working with it out? Put it back into a slot until that thing works.

[A W Warn]

Your owners manual has diagrams in section 8 that show the 12v fuse layout.

[PKI]

Use the two outside positions.

There are converter install threads that you can search and see the fuse locations on the DC board. Good luck. Pat

http://www.airforums.com/forums/f449...es-162905.html try this link

[TG Twinkie]

Just put a fuse in all 3 slots. Problem Solved.

[Profcbutler]

Thank you for all responses. I just changed out the converter and DC board with a four stage converter (as recommended in the AS battery forum). The new DC board only has two spots for a 30 amp fuse. Problem solved:

As a side note I love this charger. No more burning batteries and with the pendant I can see the status of the charging. A really great upgrade, and easy to do. Only took me about two hours and $250