Atwood Furnace Replacement

[vincaroo]

Hey All,
Getting ready to replace our furnace with a new Atwood Excalibur iv in our new 1995 34' Excella 1000. I know that Suburban is far more common, but I'm replacing an old Atwood that was already there and the dimensions are right. Does anyone know of a post that anyone has done showing a step by step instruction with photos for demonstrating the replacement?

Thanks,
Jeff

[Lumatic]

No, but I just had a blower motor replaced on my 93. The Atwood looks like a fairly easy replacement. I will follow this thread with interest.

[SeeMore]

Years ago Atwood started removing the general/internet availability of information for their products; probably due to legal concerns about DIY work. They are quick to recommend you go to a shop rather than attempt self service if you call for help/insight. However, Atwood is pretty good at supplying parts if you know what you need so the part names in the link below might be of some assistance.

http://www.ntpdistribution.com/PDF/V...bur8500III.pdf

That noted, some material on earlier generations can still be found on the net that might help you figure out your install challenge. For example:

http://bryantrv.com/docs2/docs/hflamefurn04.pdf


As for pictures and a 'how-to' thread on the forums, I haven't seen one. There are some about the Suburban for whatever insight that provides.

[vincaroo]

Thanks for the replies. I'll try to take some good pictures and post them when I tackle the job.

[Woosch]

Have you checked YouTube?