Visit our Popular Forums

Airstreamdmb · 12-05-2010, 09:43 AM

I was able to measure th small door. it was about 9X12.5 inches. If anyone can help with a door.

ALANSD · 12-05-2010, 11:17 AM

Maybe there is a fabrication shop near you? THey can do all sorts of things with aluminum and steel. You would need dimensions and a photo, then you can buy a cam lock.

chapparel · 12-06-2010, 05:48 PM

I purchased a rear compartment on ebay from a man in Oregon. He makes them. It fit my 1964 Airstream Safari. He can make you one any size you need. Here is his email address:

roseci_ewwl4305nfz@members.ebay.com

chapparel · 12-22-2010, 10:06 AM

Quote:

Originally Posted by Airstreamdmb

Good news I was able to move the airstream on existing tires for winter storage. will replace them in the Spring. The very dissapointing news is we lost the small access door on the trip. It must have fallen off during our short drive. Does anyone have one for sale or have any ideas.

__________________________________________________ _______________

Just got an email from Steve (The man in Oregon that makes the compartment doors) and if you send him an email, and give him time to get back to you, he can make one for you. Be patient as he is slow to respond. I was very happy with the one he made for me.

s.rad1@frontier.com

Airstreamdmb · 09-06-2011, 06:35 PM

Been away from the site here for a while as I'm busy going through a divorce but have worked some on AS. Have removed much of interior and replaced axles and rims. Have most recently removed the old A/C unit from the roof and installed 3 fantastic fans in the ceiling. Been listening to lots of DMB music during my project as it progresses.