2006 Yukon Brake Control Harness and Fuse
Hi All -
I am installing a Tekonsha Envoy brake controller in my 2006 Yukon, using the OE controller harness. The OE harness had a fuse attached (40A), the instructions said place it in Stud 2 in the underhood fuse panel however there alread is a fuse there (40A), and it is not even close to the same form factor. The Brake controller lights green, but does not light red when I brake regardless of the fine tuning setting. It does light red when I engage the thumb switch, and the trailer brakes do engage. Any thoughts?