|
01-31-2005, 03:32 PM
|
#1
|
2 Rivet Member
1996 25' Excella
Tallahassee
, Florida
Join Date: Jan 2004
Posts: 59
|
Broken shock absorber stud
I was replacing shock absorbers on my 96 25ft today, and one of the shock absorber studs broke off. It is the stud that is on the frame. Does anyone know if that stud is screwed into the coller or is it welded into the coller. Hard to tell, and I hate to mess with it and try to unscrew it if that is a waste of time. (I have about a 1 1/2 inch left but no threads to screw to.) I called airstream and they show a part, "shock absorber bolt" but they could not really tell me anything about it. I guess my best option will be to buy a bolt and have it welded, but it is just a "pain", going out and finding a welder for a little thing like that. Maybe just drill it out and through bolt it, has anyone tried that?
Any options would be appreciated
|
|
|
01-31-2005, 03:55 PM
|
#2
|
Rivet Master
Airstream Dealer
Corona
, California
Join Date: Feb 2002
Posts: 16,497
|
All Airstream shock studs are welded into place.
Using a bolt would not be wise.
Andy
|
|
|
01-31-2005, 04:39 PM
|
#3
|
Rivet Master
, Minnesota
Join Date: Aug 2003
Posts: 7,721
|
Monroe makes a kit that you can use to add a stud. It's a lot of work to drill through the frame, and then you'll always worry if the frame is going to buckle. http://www.shockwarehouse.com/cgi-bi..._retrokit.html
I welded the shock stud to a 3×3 plate, and used grade 8 screws to hold the plate to the frame, which was re-inforced to prevent buckling.
If possible, I think you should weld a new stud to a mounting plate, weld the plate to the frame.
|
|
|
01-31-2005, 05:51 PM
|
#4
|
Retired.
Currently Looking...
.
, At Large
Join Date: Jun 2003
Posts: 21,276
|
That stud is welded to the axle assembly, you can lower that axle and drill out the stud for the shock mount, and weld a new one in its place. It is a relatively straightforward procedure, if you have a way to roll the other wheels up on a ramp to give you clearance. Oh, yes, and an arcwelder
The replacement shock stud previously mentioned will wotk, and can be welded.
Terry
__________________
Meddle not in the affairs of dragons, for you are crunchy, and taste good with ketchup.
Terry
|
|
|
01-31-2005, 06:11 PM
|
#5
|
Rivet Master
2001 34' Limited S/O
Moyock
, North Carolina
Join Date: Feb 2004
Posts: 1,010
|
All welds are not created equal. Make certain that you know your materials and have the proper filler material and a qualified welder.
__________________
Keep the shiny side up.
WBCCI # 348
Past Region 3 President
Past President Tidewater Unit 111
Rick Bell in "Silverbell"
|
|
|
01-31-2005, 06:15 PM
|
#6
|
Retired.
Currently Looking...
.
, At Large
Join Date: Jun 2003
Posts: 21,276
|
Quote:
Originally Posted by Tarheel
All welds are not created equal. Make certain that you know your materials and have the proper filler material and a qualified welder.
|
Sorry, I tend to forget that not everyone in the world knows how to weld...
Terry
__________________
Meddle not in the affairs of dragons, for you are crunchy, and taste good with ketchup.
Terry
|
|
|
01-31-2005, 06:26 PM
|
#7
|
Rivet Master
Join Date: Mar 2002
Posts: 1,486
|
Quote:
Originally Posted by argosy20
That stud is welded to the axle assembly
Terry
|
I think he is talking about the one on the frame.
Mark
|
|
|
01-31-2005, 06:34 PM
|
#8
|
Rivet Master
2001 34' Limited S/O
Moyock
, North Carolina
Join Date: Feb 2004
Posts: 1,010
|
Terry I was a structural steel worker and worked in the engineering dept. We had a lot of cases where material was misidentifed and welded with the wrong material. One case was on a pipe to a hull valve on a submarine. It happens.
__________________
Keep the shiny side up.
WBCCI # 348
Past Region 3 President
Past President Tidewater Unit 111
Rick Bell in "Silverbell"
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|