Refer won't lite
Last Wednesday while loading for 4 days of boon docking in downtown Brownwood, TX, at the Region 9 Rally, I could not get the propane to lite with plenty of gas and DC power showing on the panel. Just a Check Light after every attempt. It has been raining hard here of and on for weeks. After we got to Brownwood, something told me to check the outside refer compartment. I looked and checked all connections for security. I found a DC fuse in a water tight holder and opened it pulled the fuse and checked it. OK. When I reinstalled it I heard a click and the refer has been running ever since. This was the first time in 11 years anything was done to the electrical side of the refer. Early on, when the unit was nearly new, I had all the circuit board contacts cleaned because operation had become intermittent. So I really was expecting to replace a circuit board this time. Lesson: alway check all connections and fuses after turning the device off for 10 second to let things reset.
guskmg
|
👍
Linear Mode
