help with Dometic
I have a dometic RM3862 two way fig
I replaced thermo coupling that sinces if the flame is lite
igniter box and igniter
circus board
thermostor that goes in the fig to see what the temp in the fig is
the ac works fine but not the gas
the battery reads 13v
the gas burner is clean
it lights but goes out immediately and check light comes on
the gas value seems to work long enough to light and nice blue flame
all the wire connections are all in the correct posions includeing the new gound
the thromo coupler is not bent and kinked and is not touching anything
when thotastor is unplug it turns on in the same way just takes long to try and lite
the igniter is click and sending a spark to light the flame and the spark is blue and can be seen
does anyone know what could be going wrong
Harvey Jones
806 244 8141
|