Same thing happened with our panel and a so far a I believe "permanent" fix was:
1) Trim the panel length slightly (1/8")
2) Bond the lower trim in place at the tab locations with construction adhesive, cure 24 hours.
3) Slide panel into place ensuring it is full seated in the lower trim.
4) Install top trim piece and bond tabs with construction adhesive.
5) Install a a couple of pop rivets through the top trim piece into the panel.
__________________
2018 GMC Canyon CCSB V6 Mallet Supercharger
2006 Chevrolet CCSB 2500HD 6.6T LBZ
|