|
02-09-2004, 09:04 PM
|
#1
|
2 Rivet Member
Join Date: Oct 2002
Posts: 92
|
Olympic rivet tools
Anybody out there close to the Central Coast of CA (San Luis Obispo) who has the tools to install Olympic rivets? I need to put my new nameplate/logo on and I'd like to rent someone's tools or expertise cuz I have all of 6 or 8 rivets to do. Will swap or pay. Thanks.
|
|
|
02-09-2004, 10:59 PM
|
#2
|
a.k.a. Ambassador Tim
1960 28' Ambassador
Northern
, California
Join Date: Jun 2003
Posts: 1,921
|
Smallfry,
You just use a standard pop rivet tool to install Olympic rivets. You can get the tool and any home center like Home Depot.
The only special tool is a rivet shaver to give the Olympic rivet that smooth factory look. But its not required.
Don't forget to put a dab of vulkulm on each rivet before installing them.
Good Luck!
|
|
|
02-10-2004, 07:22 AM
|
#3
|
Rivet Master
Commercial Member
1968 17' Caravel
2005 30' Safari
Somewhere
, roaming America
Join Date: Apr 2003
Posts: 1,095
|
If you own a vintage Airstream, go ahead and buy the pop rivet tool and a box of 100 rivets. You'll need them eventually. You can use a clipper and a file to clean up the tops of a few rivets rather than investing big bucks in the rivet shaver.
Have you taken a peek at your Bubble's underside? I'm not sure if the Bubble has a belly skin like later models, but if it does and it hasn't been recently refurbished, it's a good bet you've got more riveting to do ... !
|
|
|
02-10-2004, 11:55 AM
|
#4
|
2 Rivet Member
Join Date: Oct 2002
Posts: 92
|
rivets again
Thanks Tube but I have a pop rivet tool and have done a whole lot of riveting on the rebuild on the Bubble. It's the head shaving part that has me stalled. The belly pan on my trailer has long been gone to the dump - it was a disaster area and a new will be built. Hopefully. One of these days.
|
|
|
02-10-2004, 12:14 PM
|
#5
|
Just a member
1978 28' Argosy 28
Lutz
, Florida
Join Date: Mar 2002
Posts: 4,549
|
Small fry,
PM me an Adress and I will sned you some Olympics. Rluhr has the right idea, I have used a dremel to knock them down to make them presentable until I can get to someone with a shaver. I am lucky to have one I can borrow for a day if need be.
__________________
Brett G
WBCCI #5501 AIR # 49
-------------------------
1978 Argosy 28 foot Motorhome
Wise men talk because they have something to say; fools, because they have to say something. -- Plato
|
|
|
10-16-2014, 02:23 PM
|
#6
|
GlamperGirl
Join Date: Oct 2014
Posts: 377
|
Holy smokes we need a care package for the $250 SHAVER! The ONE TIME ONE USE TOOL! Is there a rental program one of you very smart tool owners has that I can leverage? I am going to begin replacing, resealing etc. my 8 windows in the 65 GT.
|
|
|
10-16-2014, 02:24 PM
|
#7
|
GlamperGirl
Join Date: Oct 2014
Posts: 377
|
Quote:
Originally Posted by Safari Tim
Smallfry,
Don't forget to put a dab of vulkulm on each rivet before installing them.
Good Luck!
|
What color - gray seems obvious or is it clean VULKULM?
|
|
|
10-16-2014, 02:28 PM
|
#8
|
Rivet Master
1979 23' Safari
1954 29' Liner
Orange
, California
Join Date: Feb 2005
Posts: 3,850
|
Check with Our of Doors Mart, they had a rental program at one time.
Bill
Quote:
Originally Posted by thumbelinadj
Holy smokes we need a care package for the $250 SHAVER! The ONE TIME ONE USE TOOL! Is there a rental program one of you very smart tool owners has that I can leverage? I am going to begin replacing, resealing etc. my 8 windows in the 65 GT.
|
__________________
Bill Kerfoot, WBCCI/VAC/CAC/El Camino Real Unit #5223
Just my personal opinion
1973 Dodge W200 PowerWagon, 1977 Lincoln Continental, 2014 Dodge Durango
1979 23' Safari, and 1954 29' Double Door Liner Orange, CA
https://billbethsblog.blogspot.com/
|
|
|
10-16-2014, 05:26 PM
|
#9
|
3 Rivet Member
Commercial Member
1960 24' Tradewind
Riverside
, United States
Join Date: Feb 2007
Posts: 111
|
Every Airstream dealership should have a shaver, why not just stop by and ask for it to be done, I don't know why anyone would refuse to do that simple 1 minute job, I wouldn't hesitate.
Greg
__________________
Greg Paulsen
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|