Replace kitchen sink basin cabinet

[Revedream]

Follow this forum religiously and have not found this topic so asking...

We have a 2020 27' Globetrotter and not a fan of the jutted out sink cabinet. We travel with our dogs and it always seems like it is in the way. Has anyone replaced the whole cabinet with a streamlined cabinet, as in the 30'? We have considered just selling and purchasing the 30' but we have already added many expensive upgrades to our 27' and I feel like with a few changes, it would meet our needs. Any one with experience with this?

TIA

[Ron Glow]

Originally Posted by Revedream

Follow this forum religiously and have not found this topic so asking...

We have a 2020 27' Globetrotter and not a fan of the jutted out sink cabinet. We travel with our dogs and it always seems like it is in the way. Has anyone replaced the whole cabinet with a streamlined cabinet, as in the 30'? We have considered just selling and purchasing the 30' but we have already added many expensive upgrades to our 27' and I feel like with a few changes, it would meet our needs. Any one with experience with this?

TIA

This may be a little too late, but thought I would share what I did.
It was fairly easy to remove the bump out sink cabinet. I added storage under the sink where there was none, switched 3 burner stove top for a 2 burner and added another hole in the wall, using the void behind pull out pantry. More floor space and more counter top space.
Ron

[Revedream]

This looks great and exactly what we are hoping to do. Questions:

1. How were you able to match the original cabinetry?
2. Did you build this yourself or have a cabinet maker do offsite?
3. Did you have a fabricator build the new countertop and is it corian?

So happy to see this project detail! Thanks so much!

[Ron Glow]

Originally Posted by Revedream

This looks great and exactly what we are hoping to do. Questions:

1. How were you able to match the original cabinetry?
2. Did you build this yourself or have a cabinet maker do offsite?
3. Did you have a fabricator build the new countertop and is it corian?

So happy to see this project detail! Thanks so much!

1. I used Wilsonart Landmark laminate purchased from Home Depot.
2. I build everything myself and take my time.
3. I used 3/4 sanded plywood I cut myself with Wilsonart Laminate on top.
The edge trim is 1/8" thick x 3/4" wide aluminum which I bent until I got the right fit.

I enjoy working with the laminate material and many choices are available.

Happy to share,
Ron

[chuckyab]

That looks awesome! I just sent you a PM with a questions