Overhead cabinet Tambour re-install sequence
Hello All,
I have read all of the tambour threads but not seeing info on putting the tambour back in place. Tambour is in good shape & I like the functionality of it. I have removed the 3 overhead cabinets, painted the tambour and cabinets seperately and now putting the pieces back together. Initially when I removed the tambour I had planned on painting the cabinets in place (with tambour out), then putting it back in. I removed screws from the side channels and slid things around a bit and was able to bend it just enough so that I could slide it out of its track. I knew that this would not go back in this way very easily. So I decided to remove the cabinets so I would then have access to the backside as well. I am now trying to fit things back together without scratching things and its real tuff. Is there a sequence that eases this process? I could completely disassemble the cabinets but not really liking the idea of that. For those that have done this before, I need some help with this one.
|