Aluminum Trim
I chose ALUMINUM T-Trim "Moulding"...and the outlet I used was:
J.H. Carr & Sons in Seattle, Washington. Their phone number is Area Code 206..763-1937.
The trim I used is "T-Trim"...not glue-on, and not screw on. It comes in 14-foot lengths, and 1-1/4 inches in width, so the edge it's been installed on needs to be able to accommodate it.
(I have 2 tables in the Salon, that are hinged together. that I desperately wanted trimmed in this 1-1/4 inch T-Trim..so in order to use the trim on them, the AIRSTREAM Stainless Steel hinges HAD to be 'reset' OFF-CENTER to accommodate the thicker tables.)
The lengths are 'rigid', so installation has to be sometimes done "off-site" to go around curves.
It is not easy to install, so not for the 'faint of heart'.
A special note: It does not have to be mitred, screwed or 'glued'.
.......Cat
|